Looking at `ifconfig -a` results I that if they are real, my box
have to be cut off from network.... :
eth0 Link encap:10Mbps Ethernet HWaddr 00:00:01:00:4E:90
inet addr:193.125.202.5 Bcast:193.125.202.31
Mask:255.255.255.224
IPX/Ethernet II addr:0000BEDA:000001004E90
IPX/Ethernet 802.2 addr:ADEABADA:000001004E90
IPX/Ethernet 802.3 addr:00000BAD:000001004E90
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:36873311 errors:202647 dropped:0 overruns:0
TX packets:277 errors:44204729 dropped:272064 overruns:0
Interrupt:11 Base address:0x6000
eth1 Link encap:10Mbps Ethernet HWaddr 00:40:05:23:FA:27
inet addr:192.168.125.1 Bcast:192.168.125.15
Mask:255.255.255.240
IPX/Ethernet II addr:0000FACE:00400523FA27
IPX/Ethernet 802.2 addr:0000BABA:00400523FA27
IPX/Ethernet 802.3 addr:0000FADE:00400523FA27
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:43124626 errors:184698 dropped:0 overruns:0
TX packets:0 errors:36188801 dropped:207649 overruns:0
Interrupt:10 Base address:0x340
The amount of errorse, especially on sending seems to be too great. And as
if my box is IPX and IP router, I can't understand, how can it be (TX=0) if
routing is going OK .... Any thoughts ?
Bye.
-- You might have mail
-- With best of best regards, Pawel S. Veselov (aka Black Angel) internet : vps@beta.niimm.spb.su fidonet : 2:5030/5.412 schoolnet : 21:9000/412 Web page : http://www.niimm.spb.su/~vps/