CD-Rom IRQ

Seth S. Edwards (seth.edwards@pobox.com)
Fri, 13 Jun 1997 10:47:33 -0600

I've recently tried accessing an iso9660 CD and continuously recieve IRQ
errors. My system is a Cyrix 150+, 32M ram, WD 1.6G patched, Hitachi
4x IDE CD-Rom on hdd, kernel 2.0.30 with cyrix patch. Motherboard is a
Triton II 430VX. I've tried with and without the Triton chipset
compiled in. The CD's work fine in my parents' old 486DX/33 with 2x
CD-rom.

Error message:
Jun 13 10:37:36 kh147b28 kernel: hdd: irq timeout: status=0x58
Jun 13 10:37:36 kh147b28 kernel: hdd: ATAPI reset complete
Jun 13 10:37:36 kh147b28 kernel: hdd: status error: status=0x58
Jun 13 10:37:36 kh147b28 kernel: hdd: drive not ready for command
Jun 13 10:37:36 kh147b28 kernel: hdd: ATAPI reset complete
Jun 13 10:37:36 kh147b28 kernel: end_request: I/O error, dev 16:40,
sector 1025258
Jun 13 10:37:36 kh147b28 kernel: lp1 out of paper
Jun 13 10:37:46 kh147b28 kernel: lp1 out of paper
Jun 13 10:37:53 kh147b28 kernel: hdd: irq timeout: status=0x58
Jun 13 10:37:53 kh147b28 kernel: hdd: ATAPI reset complete
Jun 13 10:37:53 kh147b28 kernel: hdd: status error: status=0x58
Jun 13 10:37:53 kh147b28 kernel: hdd: drive not ready for command
Jun 13 10:37:53 kh147b28 kernel: hdd: ATAPI reset complete
Jun 13 10:37:53 kh147b28 kernel: end_request: I/O error, dev 16:40,
sector 1033206

-- 
There is no Emotion, There is Peace
There is no Ignorance, There is Knowledge
There is no Passion, There is Serenity
There is no Death, There is the *****