Hi all,
I can't get it to work at all!
This do i see in messages:
parport0: PC-style at 0x378, irq 7 [SPP,PS2,EPP,ECPEPP,ECPPS2]
parport1: PC-style at 0x3bc, irq 5 [SPP,PS2]
-- looks ok to me
lp0: using parport0 (interrupt-driven).
and later lp0 out of paper
-- Uh?? lots of paper in the proprinter!
lpc> status
lp:
queuing is enabled
printing is enabled
2 entries in spool area
lp is ready and printing
lpc> q
in the syslog:
NET3 PLIP version 2.3-parport gniibe@mri.co.jp
plip1: Parallel port at 0x3bc, using IRQ 5
ifconfig:
plip1 Link encap:Ethernet HWaddr FC:FC:AC:10:01:01
inet addr:172.16.1.1 P-t-P:172.16.1.2 Mask:255.255.255.0
UP POINTOPOINT RUNNING MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:1 dropped:0 overruns:0 carrier:1 coll:0
Interrupt:5 Base address:0x3bc
ping 172.16.1.2
PING 172.16.1.2 (172.16.1.2): 56 data bytes
--- 172.16.1.2 ping statistics ---
5 packets transmitted, 0 packets received, 100% packet loss
proc/cmdline: parport=0x378,7 parport=0x3bc,5
in the beginning of my rc.inet1, I have:
# Load parport
/sbin/insmod lp parport=0
/sbin/insmod plip parport=1
and later:
/sbin/ifconfig plip1 172.16.1.1 pointopoint 172.16.1.2 irq 05 arp netmask 255.255.255.0
Can somebody point to me what is wrong here?
Oh yes forgot to tell, in dos the printer(lpt1) is working and i can
use laplink between my pc(lpt1) and my laptop.
--
Groeten / Regards, Rene Blokland -o)
/\\
Al is je pc'tje nog zo snel, microsoft vertraagt hem wel. _\_v
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu