still sound problems....

Bruno Boettcher (bboett@yoda.u-strasbg.fr)
Fri, 13 Mar 1998 14:32:49 +0100 (MET)


Hello,

i am still trying to get sound working (SB-PnP, kernel 2.1.89). I did now
compile the sound-part in the kernel, no module, the card is configured with
isapnp-tools.

I thing that i am missing is in old kernels there was a point to select in
kernel config: /dev/audio & /dev/dsp, this point isn't anymore in the sound
selection.... so i suppose they are set automaticly?

nevertheless, theres somewhere a problem:
cat /dev/sndstat
OSS/Free:3.8s2++-971130
Load type: Driver compiled into kernel
Kernel: Linux yoda 2.1.89 #5 Thu Mar 12 00:11:29 MET 1998 i686
Config options: 0

Installed drivers:
Type 26: MPU-401 (UART)
Type 2: Sound Blaster
Type 29: Sound Blaster PnP
Type 7: SB MPU-401

Card config:
(Sound Blaster at 0x220 irq 5 drq 1,5)
(SB MPU-401 at 0x330 irq 1 drq 0)

Audio devices:

Synth devices:

Midi devices:

Timers:
0: System clock

Mixers:

but issuing a command like cat ~bboett/tmp/sound/pink_panther.au >/dev/audio
produces bash: /dev/audio: No such device or address

configured with isapnp:
(CONFIGURE CTL0086/222056003 (LD 0
# ANSI string -->Audio<--

(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (BASE 0x0220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))

and kernel 2.1.89 config:
CONFIG_SOUND=y
CONFIG_SB=y
CONFIG_SB_BASE=220
CONFIG_SB_IRQ=5
CONFIG_SB_DMA=1
CONFIG_SB_DMA2=5
CONFIG_SB_MPU_BASE=330
CONFIG_SB_MPU_IRQ=-1

And no choice for selection /dev/audio was present....
so what's going wrong????

ciao
bboett at erm1 dot u-strasbg dot fr
==============================================================
bboett at erm1 dot u-strasbg dot fr
http://erm6.u-strasbg.fr/~bboett
===============================================================
Unsolicited commercial email is NOT welcome at this email address

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu