Thanks.
Robert
Thus spake Nick Randell (nick@adc.metrica.co.uk):
> Hi
>
> When I use the bt848, I normally build it as modules. To use it you need
> then videodev, i2c and bttv modules.
> Looking through the config there does not seem to be any option for i2c
> support. I would suggest trying as a module unless anyone else knows how to
> include i2c support as standard.
>
> Nick
>
>
> >
> >
> > While re-compiling to add BT848 support I got this:
> >
> > drivers/char/char.a(bttv.o): In function `attach_inform':
> > bttv.o(.text+0x4c1): undefined reference to `i2c_control_device'
> > drivers/char/char.a(bttv.o): In function `set_freq':
> > bttv.o(.text+0x1162): undefined reference to `i2c_control_device'
> > bttv.o(.text+0x1199): undefined reference to `i2c_control_device'
> > bttv.o(.text+0x11bf): undefined reference to `i2c_control_device'
> > bttv.o(.text+0x11ce): undefined reference to `i2c_control_device'
> > drivers/char/char.a(bttv.o)(.text+0x296a): more undefined
> > references to
> > `i2c_control_device' follow
> > drivers/char/char.a(bttv.o): In function `init_bt848':
> > bttv.o(.text+0x3cd0): undefined reference to `i2c_register_bus'
> > drivers/char/char.a(bttv.o): In function `release_bttv':
> > bttv.o(.text+0x43b6): undefined reference to `i2c_unregister_bus'
> > make: *** [vmlinux] Error 1
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
----------------------------------------------------------------------------- Robert L. Harris | NT is secure.... System Engineer For Hire. \_ as long as you don't remove the shrink wrap.
DISCLAIMER: These are MY OPINIONS ALONE. I speak for no-one else. perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu