Re: PII 400mhz boot problems

Cort Dougan (cort@ladron.cs.nmt.edu)
Wed, 22 Apr 1998 22:38:10 -0600 (MDT)


I have the same trouble with a dual PII 333MHz but not on a 200MHz system.
I also have trouble with the tulip and de4x5 drivers. I suspect the
processor speed (or perhaps pci bus speed) may be too great for those
devices.

Is this the AIC driver? I had a lot of trouble with it but things
smoothed out after I took it out. I had good luck with 2.1.89, try it
out.

}okay im having problems with 2.1.96 on my pII 400mhz box. it worked fine
}with the
}stock redhat5.0 install. I upgraded the kernel to 2.1.96 (along with
}everthing else) it compiled with no errors. Upon reboot the machine locked
}up as soon
}as it started checking the scsi devices...
} scsi: 1 host
} (scsi:0:0:-1:-1) scanning channel devices
}the machine responds to the <shift> <pageup> keystrokes but thats it ..I
}can see no problems in the boot messages. Any help would be appreciated.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu