Well, it looks like I spoke too soon. While the floppy driver loads
properly, my PCI NE2000 card suddenly stopped working after less than
an hour of use. I have two machines, each a Tyan Titan Pro with 2 PPro
CPUs. The machine with a PCI tulip card has been running OK for nearly
10 hours. The machine with the NE2000 card isn't doing so well.
Bringing the interface down, unloading the ne and 8390 modules and
bringing it all back up again doesn't fix the problem. I've appended
my kernel logs below.
Regards,
Richard....
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
inserting floppy driver for 2.1.99
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
ncr53c875-0-<6,0>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 15)
Uniform CD-ROM driver Revision: 2.12
Adding Swap: 130748k swap-space (priority -1)
loading device 'eth0'...
ne.c: PCI BIOS reports Realtek 8029 at i/o 0x8000, irq 18.
ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x8000: 00 40 05 5f 55 02
eth0: NE2000 found at 0x8000, using IRQ 18.
loading device 'eth1'...
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=670.
Socket destroy delayed (r=0 w=256)
Socket destroy delayed (r=0 w=384)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1000.
Socket destroy delayed (r=0 w=128)
Socket destroy delayed (r=0 w=384)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1000.
Socket destroy delayed (r=0 w=256)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1000.
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1000.
Socket destroy delayed (r=0 w=256)
Socket destroy delayed (r=0 w=640)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1500.
Socket destroy delayed (r=0 w=640)
loading device 'eth0'...
ne.c: PCI BIOS reports Realtek 8029 at i/o 0x8000, irq 18.
ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x8000: 00 40 05 5f 55 02
eth0: NE2000 found at 0x8000, using IRQ 18.
loading device 'eth1'...
Socket destroy delayed (r=0 w=384)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=932.
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1000.
Socket destroy delayed (r=0 w=384)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=1000.
loading device 'eth0'...
ne.c: PCI BIOS reports Realtek 8029 at i/o 0x8000, irq 18.
ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x8000: 00 40 05 5f 55 02
eth0: NE2000 found at 0x8000, using IRQ 18.
loading device 'eth1'...
Socket destroy delayed (r=0 w=128)
eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=922.
Socket destroy delayed (r=0 w=256)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu