#You got several possible drivers to drive the DC390F:
#1) ncr53c8xx
#I'd recommend the first one and enable the NVRam detection. It works
#perfectly here.
#I didn't test the 53c7,8xx.
#The tmscsiw driver is adapter specific and can be found on
#ftp://student.physik.uni-dortmund.de/pub/linux/kernel/patches/
#(filename is something like dc390wuf.diff). This one works as well.
#Don't forget to compile it into the kernel, to insmod it in your bootup
#scripts or to tell your kerneld to load it, when accessing block-major-8.
Okay, we've got success using ncr53c8xx finally, with NVram. However, I've
found another bug that's going to drive me nuts.
ncr53c8xx: at PCI bus 0, device 10, function 0
ncr53c8xx: 53c875 detected with Tekram NVRAM
ncr53c875-0: rev=0x03, base=0xe1020000, io_port=0x6200, irq=9
ncr53c875-0: Tekram format NVRAM, ID 7, Fast-20, Parity Checking
ncr53c875-0: on-board RAM at 0xe1021000
ncr53c875-0: restart (scsi reset).
ncr53c875-0: copying script fragments into the on-board RAM ...
scsi0 : ncr53c8xx - revision 2.5f
scsi : 1 host.
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
ncr53c875-0-<1,0>: using tagged command queueing, up to 12 cmds/lun
Vendor: IBM Model: DCAS-32160 !# Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1755
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr6 at scsi0, channel 0, id 2, lun 0
scsi : detected 7 SCSI cdroms 1 SCSI disk total.
I have it set to 32cmds/lun via make menuconfig! GAH! *pout* Oh well,
everything's working a HELL of a lot faster now. Anybody want an AHA1520B
clone, sans BIOS? Works with Linux! Only, uh, $10+Shipping! :)
-Phil R. Jaenke (kernel@nls.net / prj@nls.net)
TheGuyInCharge(tm), Ketyra Designs - We get paid to break stuff :)
Linux pkrea.ketyra.INT 2.0.33 #15 Sat Apr 18 00:40:21 EDT 1998 i586
Linux eiterra.nls.net 2.0.33 #15 Fri Apr 17 00:22:13 EDT 1998 i586
- Linus says for 'brave people only.' I say 'keep a backup.' - :)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu