Ten minutes later we got a bunch more "Unable to load interpreters",
and I had to hit the reset button. I did do a Ctrl-Scrollock, if
anyone wants to see that.
Unable to load interpreter
general protection: 0000
CPU: 0
EIP: 0010:[tcp_recvmsg+368/1036]
EFLAGS: 00010217
eax: f000e987 ebx: 00000000 ecx: 02b03834 edx: f000f84d
esi: 02b038d0 edi: 00000194 ebp: 02b03810 esp: 03c2dee8
ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
Process httpd (pid: 11889, process nr: 270, stackpage=03c2d000)
Stack: 02b03810 03c2df7c 00000000 00000000 0fffee4d 02b03834 00000000 00000194
0340f414 012f2a48 0000e506 0014e496 02b03810 03c2df78 00000e6c 00000000
00000000 03c2df7c 00001000 012f2a00 0808fe94 012f2a90 00135a5f 012f2a90
Call Trace: [inet_recvmsg+114/136] [sock_read+171/192]
[sys_read+192/232] [system_call+85/128]
Code: 8a 40 0d a8 02 74 04 ff 4c 24 10 8b 7c 24 10 39 7b 30 0f 87
Unable to load interpreter
Unable to load interpreter
etc...
Machine is a P~133 w/64mb ram, running vanilla 2.0.33. It's a
webserver w/~100k hits/day.
CONFIG_MODULES=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_M586=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_TRITON=y
CONFIG_INET=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_EXT2_FS=y
CONFIG_PROC_FS=y
syslogd 1.3-3#17: restart.
klogd 1.3-3, log source = /proc/kmsg started.
Loaded 2790 symbols from /System.map.
Symbols match kernel version 2.0.33.
No module symbols loaded.
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fdb60
pcibios_init : BIOS32 Service Directory entry at 0xfdb70
pcibios_init : PCI BIOS revision 2.10 entry at 0xfdb91
Probing PCI hardware.
Calibrating delay loop.. ok - 53.25 BogoMIPS
Memory: 63516k/65536k available (512k kernel code, 384k reserved, 1124k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Intel Pentium with F0 0F bug - workaround enabled.
alias mapping IDT readonly ... ... done
Linux version 2.0.33 (root@www) (gcc version 2.7.2.1) #3 Wed Dec 17 16:12:41 CST 1997
Starting kswapd v 1.4.2.2
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
hda: WDC AC31600H, 1549MB w/128kB Cache, CHS=787/64/63, DMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eth0: 3Com 3c590 Vortex 10Mbps at 0x7f80, 00:a0:24:68:ef:56, IRQ 11
32K byte-wide RAM 1:1 Rx:Tx split, autoselect/10baseT interface.
eth0: Overriding PCI latency timer (CFLT) setting of 64, new value is 248.
3c59x.c:v0.46C 10/14/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Partition check:
hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 20156k swap-space (priority -1)
Have a good day,
-- Pete Harlan harlan@pointofchoice.com- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu