> I have been unable to use my CardBus cards on my laptop since around 2.1.89
> when the pci code changed - is this a known problem? One specific error from
> the 3c575 card is like this
>
> vortex_attach(bus 35, function 0)
> loading device 'eth0'...
> eth0: 3Com 3c575 at 0x100, 00:60:08:02:10:11, IRQ 0
> *** Warning: IRQ 0 is unlikely to work! ***
> 8K word-wide RAM 3:5 Rx:Tx split, autoselect/NWay Autonegotiation interface.
> MII transceiver found at address 0, status 7809.
> Enabling bus-master transmits and whole-frame receives.
The CardBus support was broken by PCI code changes and we're currently
working on fixing it.
Have a nice fortnight
--
Martin `MJ' Mares <mj@ucw.cz> http://atrey.karlin.mff.cuni.cz/~mj/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
main(){char *s="main(){char *s=%c%s%c;printf(s,34,s,34);}";printf(s,34,s,34);}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu