virtual address c0000849 error on install
Andrew Fox (afox@net1plus.com)
Mon, 8 Jun 1998 16:53:37 -0400
Please help,
>
> I have a Canon MT4900 Inovia Media 486DX4/100 w/ 16M RAM, 2GB IDE Hard
> Disk,Logitech Mouse, Microsoft Keyboard and 2 Intel Etherexpress 10M ISA
> Network Interface Cards. I am running Redhat 5.0. I intend to use this
> machine as a firewall for a small network.
>
> The issue starts when booting off of a floppy or off of the CD to invoke
the
> installation program either expert or standard mode causes the following
and
> at this point the machine locks up and can only be power cycled.
>
> I am guessing that there may be a switch that allows you to exclude a
memory
> location when you start the install in expert mode.
>
> Any suggestions would be gladly appreciated.
>
> Andrew Fox (afox@net1plus.com)
>
>
> PS/2 Aux. Pointing device detected...
> Real Time Clock Driver v1.07
> Ramdisk driver Initialized : 16 ramdisks of 4096k size
> Unable to handle kernel NULL pointer dereference at virtual address
c0000849
> current->tss.cr3 = 00101000, % cr3 = 00101000
> *pde = 00102067
> *pte = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<000fceba>]
> EFLAGS:00010016
> eax: 0000b102 ebx: 00001042 cbx: 10001042 edx: 00101042
> esi: 00000000 edi: 001cf1c0 ebp: 00ef6eea esp: 00ef6ed4
> ds: 0018 es: 0018 fs: 002b gs: 0018 ss: 0018
> Process swapper (pid: 1, process nr: 1, stackpage
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu