> In 2.1.105 and .106, printing is essentially broken for me. It seems
> as if "flow control" does not work - the print-outs I get have missing
> lines, garbled data and look just plain awful. Oddly, there seems to
> be no errors, warnings or other messages logged anywhere - as far as
> Linux and lpd are concerned, everything looks fine and dandy.
> Log messages when the module loads:
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport0: no IEEE-1284 device present.
> lp0: using parport0 (polling).
Have you tried adding the irq= option to the options string for the
parport_pc driver? Tell it the IRQ, then try again. It may work. (Of
course it may not - no warranties here. :)
Derrik Pates
dpates@kalifornia.com
dpates@acm.org
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu