2.1.106 boot failure ??

scoffin@netcom.com
Sat, 20 Jun 1998 09:34:29 -0600

I got the following boot-time message twice recently with 2.1.106,
in about 20 successful boots. Never had this before with any previous kernel.
I have made no config changes since 2.1.8x, 2.1.9x. 2.1.10x, etc etc.
Any comments appreciated....

ps= machine is PPro 200, 2940 SCSI controller, boot disk is 4.2 GB on sda

=S.Coffin
scoffin@netcom.com

=================================================================
Partition check:
sda: scsidisk I/O Error: dev 08:00, sector 0
unable to read partition table
Drive not ready. Make sure there is a disk in the drive
sda: read capacity failed.
sda: status=1, message=00, host=0, driver=28
sda: extended sense code=2
sda: block size assumed to be 512 bytes, disk size 1GB
sda: scsidisk I/O Error: dev 08:00, sector 0
unable to read partition table
VFS: cannot open root device 08:02
Kernel panic: VFS: unable to mount root fs on 08:02
=================================================================

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu