IDE in 2.1.10[789] (ot)

Michael 'Ghandi' Herold (michael@abadonna.mayn.de)
Sun, 19 Jul 1998 17:47:02 +0200

Currently I have a problem with a GigaByte GA-586S2 Board.

During boot, the kernel displays the following:

<4>SIS5513: IDE controller on PCI bus 00 dev 09
<4>SIS5513: not 100ative mode: will probe irqs later
<4> ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio
<4> ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
<4>hda: SAMSUNG WA32163A, ATA DISK drive
<4>hdb: SAMSUNG SHD-3212A (APOLLO-4) AD, ATA DISK drive
<4>hdc: CD-512E, ATAPI CDROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15

At runtime, I got the following syslog messages:

Jul 19 07:44:17 abadonna kernel: hda: status error: status=0x58
{ DriveReady SeekComplete DataRequest }
Jul 19 07:44:17 abadonna kernel: hda: drive not ready for command
Jul 19 07:44:17 abadonna kernel: ide0: reset: success

I don't know if this is really a problem (i have no data
corruption or something else), but is there a solution for this
(i have not found one in the list archive, but found some
messages describing the boot message)?

-- 
 Michael 'Ghandi' Herold - michael@abadonna.mayn.de
 GeFökoM e.V.                          ICQ #1315303


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html