I don't understand these messages--ethernet card detection
is doing something funny. My .config is available on request. With the
2.1.102 kernel I am running now, the cards are handled correctly.
I have "ether=0,0,eth1" on the boot line.
Maybe they are nothing to worry about?
eth0: DE450-CA at 0x8000 (PCI bus 0, device 5), h/w address 00:00:f8:02:04:34,
and requires IRQ18 (provided by PCI BIOS).
de4x5.c:V0.540 1998/7/5 davies@maniac.ultranet.com
eth1: 3c509 at 0x300 tag 1, 10baseT port, address 00 60 97 1a e3 ab, IRQ 11.
3c509.c:1.12 6/4/97 becker@cesdis.gsfc.nasa.gov
eth2: region already allocated at 0x8000.
eth3: region already allocated at 0x8000.
eth4: region already allocated at 0x8000.
eth5: region already allocated at 0x8000.
eth6: region already allocated at 0x8000.
eth7: region already allocated at 0x8000.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html