Regards,
Andre Hedrick
Dyer Observatory,
Vanderbilt University
Please consider adding this to the source folks...........
AEC6210: IDE controller on PCI bus 00 dev a0
AEC6210: not 100% native mode: will probe irqs later
AEC6210: ROM enabled at 0xfebf8000 AutoDMA enabled
ide0: BM-DMA at 0xef90-0xef97, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xef98-0xef9f, BIOS settings: hdc:pio, hdd:pio
PDC20246: IDE controller on PCI bus 00 dev 98
PDC20246: 100% native mode on irq 18
ide2: BM-DMA at 0xef40-0xef47, BIOS settings: hde:DMA, hdf:DMA
ide3: BM-DMA at 0xef48-0xef4f, BIOS settings: hdg:DMA, hdh:DMA
HPT343: ignored by ide_scan_pci_device() (uses own driver)
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: device not capable of full native PCI mode
PIIX3: device disabled (BIOS)
HPT343: BaseAddress 0x0000ee80 w/ IRQ(17) AutoDMA enabled
ide4: BM-DMA at 0xee80-0xee87, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xee88-0xee8f, BIOS settings: hdk:pio, hdl:pio
hda: QUANTUM FIREBALL ST6.4A, ATA DISK drive
hdb: QUANTUM FIREBALL ST3.2A, ATA DISK drive
hdc: CD-ROM CDU611, ATAPI CDROM drive
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
hde: Maxtor 72004 AP, ATA DISK drive
hdf: Maxtor 71626 A, ATA DISK drive
hdg: WDC AC2340H, ATA DISK drive
hdh: WDC AC2340F, ATA DISK drive
hdi: WDC AC140, ATA DISK drive
hdj: WDC AC140, ATA DISK drive
ide0 at 0xeff0-0xeff7,0xefe6 on irq 19
ide1 at 0xefa8-0xefaf,0xefe2 on irq 19 (shared with ide0)
ide2 at 0xefa0-0xefa7,0xef8e on irq 18
ide3 at 0xef80-0xef87,0xef8a on irq 18
ide4 at 0xeea0-0xeea7,0xeeb6 on irq 17
hda: QUANTUM FIREBALL ST6.4A, 6149MB w/81kB Cache, CHS=784/255/63, UDMA
hdb: QUANTUM FIREBALL ST3.2A, 3079MB w/81kB Cache, CHS=782/128/63, UDMA
hde: Maxtor 72004 AP, 1916MB w/128kB Cache, CHS=973/64/63, DMA
hdf: Maxtor 71626 A, 1554MB w/64kB Cache, CHS=789/64/63, DMA
hdg: WDC AC2340H, 325MB w/128kB Cache, CHS=1010/12/55, DMA
hdh: WDC AC2340F, 325MB w/64kB Cache, CHS=1010/12/55, DMA
hdi: WDC AC140, 40MB w/31kB Cache, CHS=980/5/17
hdj: WDC AC140, 40MB w/31kB Cache, CHS=980/5/17
hdc: ATAPI 10X CDROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.13
hdd: 98304kB, 196608 blocks, 512 sector size
hdd: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Partition check:
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2
hdd: hdd1
hde: hde1
hdf: hdf1
hdg: hdg1
hdh: hdh1
hdi: hdi1
hdj: hdj1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
/proc/interrupts output:
CPU0 CPU1
0: 57687 0 XT-PIC timer
1: 1435 1200 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
3: 9363 5821 IO-APIC-edge serial
4: 2505 2189 IO-APIC-edge serial
5: 0 2 IO-APIC-edge soundblaster
8: 0 1 IO-APIC-edge rtc
12: 1399 1841 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
17: 4 5 IO-APIC-level ide4
18: 9 8 IO-APIC-level ide2, ide3
19: 1633 1633 IO-APIC-level ide0
NMI: 0
IPI: 0
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html