Any more ideas?
Bob Lanning wrote:
> You don't have the nfsroot bootp option-field set. Try setting that.
>
> ---- As written by Edward Muller:
> >
> >
> > --------------97D8B12077A3C6B5CCDF379F
> > Content-Type: text/plain; charset=us-ascii
> > Content-Transfer-Encoding: 7bit
> >
> > I am trying to setup a linux box (kernel v2.0.35) to boot linux across
> > the network. I havea boot prom demo disk from incom (www.incom.com). I
> > have the ICS DHCP Server (it is running) and a TFTP server. The boot
> > disk runs OK. It issues a BOOTP/DHCP request and gets a response (log
> > file to follow):
> >
> > DHCPDISCOVER from 00:60:08:9d:bf:b8 via eth0
> > DHCPOFFER on 192.168.0.10 to 00:60:08:9d:bf:b8 via eth0
> >
> > (it is on a closed private network, so don't worry about addresses)
> >
> > It then start downloading my linux image from the tftp demon (log file
> > to follow):
> > tftpd: trying to get file /tftproot/bp192.168.0.10.PX
> >
> > The image boots...get to this point:
> >
> > eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 60 08 9d bf b8.
> > IRQ 10.
> > 3c509.x 1.12 6/4/97 becker@cesdis.gsfc.nasa.gov
> > Sending BOOTP and RARP requests...........
> >
> > and continues to try this until it times out.....
> > The log file on the server shows the following etries until the client
> > times out:
> > dhcpd: BOOTREQUEST from 00:60:08:9d:bf:b8 via eth0
> > dhcpd: BOOTREPLY for 192.168.0.10 to sexy (00:60:08:9d:bf:b8) via eth0
> >
> > (Sexy is the name of the PC)
> >
> > altas is the name of the server. eamhome.org is the domainname I am
> > using on the net.
> >
> > I think I didn't setup something right in my dhcpd.conf becuase it
> > doesn't seem to get the reply back from the server. Here is my
> > dhcpd.conf file...
> > # dhcpd.conf
> > #
> > # Configuration file for ISC dhcpd
> > #
> >
> > server-identifier atlas.eamhome.org;
> >
> > option domain-name "eamhome.org";
> >
> > shared-network EAMHOME {
> > option subnet-mask 255.255.255.0;
> > default-lease-time 120;
> > max-lease-time 120;
> >
> > subnet 192.168.0.0 netmask 255.255.255.0 {
> > option routers 192.168.0.1;
> > option subnet-mask 255.255.255.0;
> > }
> >
> > host sexy {
> > hardware ethernet 00:60:08:9D:BF:B8;
> > fixed-address 192.168.0.10;
> > server-name "192.168.0.1";
> > filename "/tftpboot/bp192.168.0.10.PX";
> > ## option option-177
> > "nfsaddrs=192.168.0.10:192.168.0.1:192.168.0.1:255.255.255.0:sexy:eth0:both";
> >
> > option host-name "sexy";
> > }
> >
> > }
> >
> >
> > I've tried the above conf file with and without the ## commented
> > section. When I use the ## section it gets past the above hangup but
> > can't talk to nfs the server (I now the nfs server is running). I've
> > alse tried using atlas.eamhome.org in the server-name option and a few
> > other confis...Can;t remember though...
> >
> > Any ideas would be appreciated....
> >
> > Thank You
> >
> > ---
> > Edward Muller
> > eam@eclipse.net
> >
> > -----------------------------------
> > Waste Not Computers & Supplies
> > http://www.wastenotcomputers.com/
> > (201) 384-4444 x204
> > edwardm@wastenotcomputers.com
> >
> >
> >
> > --------------97D8B12077A3C6B5CCDF379F
> > Content-Type: text/html; charset=us-ascii
> > Content-Transfer-Encoding: 7bit
> >
> > <HTML>
> > I am trying to setup a linux box (kernel v2.0.35) to boot linux across
> > the network. I havea boot prom demo disk from incom (www.incom.com).
> > I have the ICS DHCP Server (it is running) and a TFTP server.
> > The boot disk runs OK. It issues a BOOTP/DHCP request and gets a response
> > (log file to follow):
> >
> > <P>DHCPDISCOVER from 00:60:08:9d:bf:b8 via eth0
> > <BR>DHCPOFFER on 192.168.0.10 to 00:60:08:9d:bf:b8 via eth0
> >
> > <P>(it is on a closed private network, so don't worry about addresses)
> >
> > <P>It then start downloading my linux image from the tftp demon (log file
> > to follow):
> > <BR>tftpd: trying to get file /tftproot/bp192.168.0.10.PX
> >
> > <P>The image boots...get to this point:
> >
> > <P>eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 60 08 9d bf b8.
> > IRQ 10.
> > <BR>3c509.x 1.12 6/4/97 becker@cesdis.gsfc.nasa.gov
> > <BR>Sending BOOTP and RARP requests...........
> >
> > <P>and continues to try this until it times out.....
> > <BR>The log file on the server shows the following etries until the client
> > times out:
> > <BR>dhcpd: BOOTREQUEST from 00:60:08:9d:bf:b8 via eth0
> > <BR>dhcpd: BOOTREPLY for 192.168.0.10 to sexy (00:60:08:9d:bf:b8) via eth0
> >
> > <P>(Sexy is the name of the PC)
> >
> > <P>altas is the name of the server. eamhome.org is the domainname I am
> > using on the net.
> >
> > <P>I think I didn't setup something right in my dhcpd.conf becuase
> > it doesn't seem to get the reply back from the server. Here is my dhcpd.conf
> > file...
> > <BR># dhcpd.conf
> > <BR>#
> > <BR># Configuration file for ISC dhcpd
> > <BR>#
> >
> > <P>server-identifier atlas.eamhome.org;
> >
> > <P>option domain-name "eamhome.org";
> >
> > <P>shared-network EAMHOME {
> > <BR> option subnet-mask 255.255.255.0;
> > <BR> default-lease-time 120;
> > <BR> max-lease-time 120;
> >
> > <P> subnet 192.168.0.0 netmask
> > 255.255.255.0 {
> > <BR>
> > option routers 192.168.0.1;
> > <BR>
> > option subnet-mask 255.255.255.0;
> > <BR> }
> > <BR>
> > <BR> host sexy {
> > <BR>
> > hardware ethernet 00:60:08:9D:BF:B8;
> > <BR>
> > fixed-address 192.168.0.10;
> > <BR>
> > server-name "192.168.0.1";
> > <BR>
> > filename "/tftpboot/bp192.168.0.10.PX";
> > <BR>## option option-177 "nfsaddrs=192.168.0.10:192.168.0.1:192.168.0.1:255.255.255.0:sexy:eth0:both";
> > <BR>
> > option host-name "sexy";
> > <BR> }
> >
> > <P>}
> > <BR>
> >
> > <P>I've tried the above conf file with and without the ## commented section.
> > When I use the ## section it gets past the above hangup but can't
> > talk to nfs the server (I now the nfs server is running). I've alse tried
> > using atlas.eamhome.org in the server-name option and a few other confis...Can;t
> > remember though...
> >
> > <P>Any ideas would be appreciated....
> >
> > <P>Thank You
> > <PRE>---
> > Edward Muller
> > eam@eclipse.net
> >
> > -----------------------------------
> > Waste Not Computers & Supplies
> > <A HREF="http://www.wastenotcomputers.com/">http://www.wastenotcomputers.com/</A>
> > (201) 384-4444 x204
> > edwardm@wastenotcomputers.com</PRE>
> > </HTML>
> >
> > --------------97D8B12077A3C6B5CCDF379F--
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.rutgers.edu
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
> --
> Robert Hajime Lanning Navigation Technologies
> Unix Systems Administrator 740 E. Arques Ave.
> (408) 617-5059 Sunnyvale, CA 94086
> lanning@fhda.edu USA
> lanning@kewltech.com lanning@navtech.com
-- Edward Muller eam@eclipse.net----------------------------------- Waste Not Computers & Supplies http://www.wastenotcomputers.com/ (201) 384-4444 x204 edwardm@wastenotcomputers.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/