Re: Confusing AIC 7xxx driver messages

Russell Lambert (russell@amdyne.net)
Sun, 20 Sep 1998 19:50:32 -0400

After looking at the settings, I realize that I did have it manually set to terminate. I had
"Low/OFF High/ON". I tried having both On also and the result is the same.

So, to answer your question, the warning disappears and it just has the regular stuff about
downloading the sequence code if I have termination manually set.

Doug Ledford wrote:

> Russell Lambert wrote:
> >
> > Ok.........
> >
> > Do you have a fix for it then? I turned off Auto-Termination to get rid of that message.
> > So it's only terminating on one end.
> >
> > I have a Tyan Tital S1570 motherboard if that means anything.
>
> What happens when you manually set termination on instead of off or auto
> term?
>
> --
>
> Doug Ledford <dledford@dialnet.net>
> Opinions expressed are my own, but
> they should be everybody's.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/