Find attached the log:
Oct 1 19:40:57 nova64 kernel: scsi : aborting command due to timeout :
pid 1712
5, scsi0, channel 0, id 0, lun 0 Read (6) 05 c0 4d 02 00
Oct 1 19:40:58 nova64 kernel: SCSI host 0 abort (pid 17125) timed out -
resetti
ng
Oct 1 19:40:58 nova64 kernel: SCSI bus is being reset for host 0 channel
0.
Oct 1 19:40:58 nova64 kernel: c0 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 0
0 00 00 00 20 5c 00 00 06 0c 00 00 00 00 00 00
-- Ricardo Galli Member of ACM - Association for Computing Machinery University of Balearic Islands ATLAS Internet Access Provider mailto:gallir@atlas-iap.es mailto:rgalli@acm.org http://www.atlas-iap.es
---------- Forwarded message ---------- Date: Thu, 1 Oct 1998 19:26:24 +0200 (MET) From: Ricardo Galli Granada <gallir@atlas-iap.es> To: Doug Ledford <dledford@dialnet.net> Cc: linux-kernel@vger.rutgers.edu Subject: Re: aic7xxx testers needed
I just tried the patch on a 2.0.35 UP with a 2940UW, I will try on the 2.1.123 in few minutes and report it in a new message.
It gave me many scsi reset errors while compiling the 2.1.123 kernel.
So, I rebooted with the option aic7xxx=verbose:0xff39 and surprisingly it gave no futher reset errors (at leat in 3 compilations).
This is the output while booting:
scb flags 0x16, while idle, LASTPHASE = 0x1 <6>(scsi0:0:0:0) SCSISIGI 0x0, SEQADDR 0x18d, SSTAT0 0x10, SSTAT1 0x2 <6>(scsi0:0:0:0) Queueing device reset command. <6>(scsi0:-1:-1:-1) 0 commands found and queued for completion. <4>SCSI host 0 channel 0 reset (pid 16) timed out - trying harder <4>SCSI bus is being reset for host 0 channel 0. <6>(scsi0:0:0:0) Reset called, scb 14, flags 0x1076 <6>(scsi0:0:-1:-1) Reset channel called, will initiate reset. <6>(scsi0:0:-1:-1) Resetting currently active channel. <6>(scsi0:0:-1:-1) Channel reset <6>(scsi0:0:-1:-1) Reset device, active_scb 0 <6>(scsi0:0:0:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:0:0:tag14) matches search criteria (scsi0:0:-1:-1:tag255) <6>(scsi0:0:1:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:2:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:3:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:4:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:5:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:6:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:7:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:8:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:9:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:10:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:11:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:12:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:13:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:14:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:15:-1) Cleaning up status information and delayed_scbs. <6>(scsi0:0:-1:-1) Cleaning QINFIFO. <6>(scsi0:0:0:0:tag14) matches search criteria (scsi0:0:-1:-1:tag255) <6>(scsi0:0:-1:-1) Cleaning waiting_scbs. <6>(scsi0:0:-1:-1) Cleaning waiting for selection list. <6>(scsi0:0:-1:-1) Cleaning disconnected scbs list. <6>(scsi0:0:0:0:tag13) matches search criteria (scsi0:0:-1:-1:tag255) <6>(scsi0:0:0:0) Aborting scb 13 <6>(scsi0:0:0:0) Aborting scb 14 <6>(scsi0:-1:-1:-1) 2 commands found and queued for completion. <4>c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 5c 00 00 06 0d 00 00 00 00 00 00 <4>40 00 00 01 00 3c 09 00 00 00 00 00 00 60 09 00 00 02 00 00 24 5a 00 00 06 0e ff 00 ff ff ff ff <6>(scsi0:0:0:0) Using Wide(16bit) transfers <6>(scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8. <4>scsi : aborting command due to timeout : pid 17, scsi0, channel 0, id 0, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00 <6>(scsi0:0:0:0) Aborting scb 14, flags 0x6 <6>(scsi0:0:0:0) SCB found on waiting list and aborted. <6>(scsi0:0:0:0) Aborting scb 14 <6>(scsi0:-1:-1:-1) 1 commands found and queued for completion. <4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 8895370 [4343 MB] [4.3 GB] <6>eth0: 3Com 3c905B Cyclone 100baseTx at 0xda00, 00:10:4b:62:12:4f, IRQ 11 <6> 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/NWay Autonegotiation interface . <6> Enabling bus-master transmits and whole-frame receives. <4>3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/driver s/vortex.html <4>Partition check: <4> sda: sda1 sda2 sda3 <4>VFS: Mounted root (ext2 filesystem) readonly. <4>scsi : aborting command due to timeout : pid 138, scsi0, channel 0, id 0, lun 0 Read (6) 09 49 a3 10 00 <6>(scsi0:0:0:0) Aborting scb 14, flags 0x4 <6>(scsi0:0:0:0) SCB disconnected. Queueing Abort SCB. <4>SCSI host 0 abort (pid 138) timed out - resetting <4>SCSI bus is being reset for host 0 channel 0. <6>(scsi0:0:0:0) Reset called, scb 14, flags 0x1094 <6>(scsi0:0:0:0) Have already attempted to reach device with queued <6>(scsi0:0:0:0) message, will escalate to bus reset. <6>(scsi0:0:-1:-1) Reset channel called, will initiate reset. <6>(scsi0:0:-1:-1) Resetting currently active channel. <6>(scsi0:0:-1:-1) Channel reset <6>(scsi0:0:-1:-1) Reset device, active_scb 1 <6>(scsi0:0:0:-1) Cleaning up status information and delayed_scbs.
-- Ricardo Galli Member of ACM - Association for Computing Machinery University of Balearic Islands ATLAS Internet Access Provider mailto:gallir@atlas-iap.es mailto:rgalli@acm.org http://www.atlas-iap.es
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/