Re: aic7xxx testers needed

Denis Karpov (dkarpov@mx.pfu.edu.ru)
Fri, 02 Oct 1998 14:38:28 +0400


Hello.
aic7xx 5.12.0pre13 works OK and pretty fast. thank you.
I've applied the patch to 2.1.124pre2 (althou the patch is fo 2.1.123 it
applies cleanly).
Here's part of my dmesg command output.

<----------------------------------------------------------------->
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 14/0
(scsi0) Narrow Channel, SCSI ID=1, 16/255 SCBs
(scsi0) Downloading sequencer code... 419 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
5.1.0pre13/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
Vendor: QUANTUM Model: XP34301 Rev: 1051
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: NEC Model: CD-ROM DRIVE:502 Rev: 2.2e
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Vendor: PINNACLE Model: OHD-1300 Rev: 2.52
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sdb at scsi0, channel 0, id 4, lun 0
Vendor: SONY Model: SDT-5000 Rev: 3.26
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI tape 1 SCSI cdrom 2 SCSI disks total.
(scsi0:0:3:0) Synchronous at 8.0 Mbyte/sec, offset 15.
Uniform CDROM driver Revision: 2.14
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8410200 [4106 MB] [4.1
GB]
(scsi0:0:4:0) Synchronous at 5.0 Mbyte/sec, offset 12.
SCSI device sdb: hdwr sector= 1024 bytes. Sectors= 637041 [622 MB] [0.6
GB]
sdb: Write Protect is on
<----------------------------------------------------------------->

Rgds, Denis.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/