Linux-Kernel Archive: VIA 82C586 IDE / UDMA problems

------=_NextPart_000_0059_01BDF701.6A20BBC0
Content-Type: text/plain;
charset="koi8-r"
Content-Transfer-Encoding: quoted-printable

After installing and configuring 2.1.125 ( skipped 123,124,125)=20
and enabeling UDMA and VIA82C586 IDE chipset support=20
=20
getteing in the boot and during work ( in varios combinations):
=20
hda: dma_intr: status=3D0x53 { DriveReady SeekComplete Index Error }
hda: dma_intr: error=3D0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=3D0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=3D0x84 { DriveStatusError BadCRC }
hda: DMA disabled
hdb: DMA disabled
ide0: reset: success

i do have VIA82C586 IDE :
IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
Medium devsel. Fast back-to-back capable. Master Capable. =
Latency=3D64. =20
I/O at 0xf000 [0xf001].
=20
and UDMA hard disk :
=20
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
hda: QUANTUM FIREBALL ST6.4A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: QUANTUM FIREBALL ST6.4A, 6149MB w/81kB Cache, CHS=3D784/255/63, =
UDMA
=20
Evgeny

------=_NextPart_000_0059_01BDF701.6A20BBC0
Content-Type: text/html;
charset="koi8-r"
Content-Transfer-Encoding: quoted-printable

After installing and configuring = 2.1.125 (=20 skipped 123,124,125)

and enabeling UDMA and VIA82C586 IDE = chipset=20 support

getteing in the boot and = during work ( in=20 varios combinations):

hda: dma_intr: status=3D0x53 { = DriveReady=20 SeekComplete Index Error }
hda: dma_intr: error=3D0x84 { = DriveStatusError=20 BadCRC }
hda: dma_intr: status=3D0x51 { DriveReady SeekComplete Error = }
hda:=20 dma_intr: error=3D0x84 { DriveStatusError BadCRC }
hda: DMA = disabled
hdb:=20 DMA disabled
ide0: reset: success

i do have VIA82C586 IDE = :

     IDE = interface: VIA=20 Technologies VT 82C586 Apollo IDE (rev = 6).
     =20 Medium devsel. Fast back-to-back capable. Master = Capable. =20 Latency=3D64.
      I/O at 0xf000=20 [0xf001].

and UDMA hard disk :

VP_IDE: IDE controller on PCI bus 00 = dev=20 39
VP_IDE: not 100% native mode: will probe irqs = later
=20 ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide0: = VIA=20 Bus-Master (U)DMA Timing Config Success
hda: QUANTUM FIREBALL ST6.4A, = ATA=20 DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: QUANTUM = FIREBALL=20 ST6.4A, 6149MB w/81kB Cache, CHS=3D784/255/63, UDMA

Evgeny