2.1.130 alpha SMP goes!

Greg J. Siekas (siekas@mailhost.tcs.tulane.edu)
Fri, 27 Nov 1998 20:56:47 -0600 (CST)

Well, I tried compiling 2.1.130 SMP again on a Alphaserver 2100 4/200 with
2 21064 cpus and got it to work, finally. Only problem was the 2 scsi
controllers and ethernet cards got switched around. Had to reorder the
disks so going back to 2.0.36 I have to physically change disks around
again. I'm running 2 raid0's. Noticed that top is broken also. Looks
good!

Greg

kernel: klogd 1.3-3, log source = /proc/kmsg started.
kernel: Loaded 5285 symbols from /System.map.
kernel: Symbols match kernel version 2.1.130.
kernel: No module symbols loaded - kernel modules not enabled.
kernel: Linux version 2.1.130 (root@nautilus.bmen.tulane.edu)
(gcc version egcs-2.90.29 980515 (egcs-1.0.3 release)) #5 SMP Fri Nov 27
19:20:38 CST 1998
kernel: Booting on Sable using machine vector Sable
kernel: Command line: root=/dev/sda1 bootdevice=fd0 bootfile=vmlinux.gz
kernel: t2_init: HBASE was 0x2000
kernel: setup_smp: 2 CPUs probed, cpu_present_map 0x3, boot_cpu_id 0
kernel: Setting RTC_FREQ to 1024 Hz (25)
kernel: Turning on RTC interrupts.
kernel: Console: colour VGA+ 80x25
kernel: Calibrating delay loop... 373.29 BogoMIPS
kernel: Memory: 125416k available
kernel: VFS: Diskquotas version dquot_6.4.0 initialized
kernel: POSIX conformance testing by UNIFIX
kernel: smp_boot_cpus: Entering SMP Mode...
kernel: secondary_console_message: on 0 from 1 HALT_REASON 0x0 FLAGS 0x1ee
kernel: secondary_console_message: on 0 message is 'P01 >>>START P01>>>'
kernel: smp_boot_cpus: Total of 2 Processors activated (746.59 BogoMIPS).
kernel: start_secondary: commencing CPU 1 current fffffc0007fe4000

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/