Has two identical pre4 kernels: non-module and module.
(Compiled for PPro, 6x86MX...)
Module version boots fine (NE2000, SB, video_capture: all OK), but
non-module version halts with following messages:
<CUT>
ttyS00 at 0x03f8 (irq = 4) is a 16550A
sb: Interrupt test on IRQ7 failed - Probable IRQ conflict
<Sound Blaster 16 (4.13)> at 0x220 irq 7 dma 1,5
_
<CUT>
Neither NumLock nor Ctrl-Alt-Del does anything, has to reset or
power-cycle.
SB's 0x220, irq 7, dma 1,5 are used by module version and works fine.
System:
MB: PCChips M572 with latest bios, disabled: on-board sound, parport,
IDE ports
CPU: Cyrix 6x86MX PR233+ (@ 2.5x75MHz)
Sound : SB32 PnP, at 0x220, irq 7, dma 1,5, ISA
Adaptec 2940UW, bios 1.25
AverMedia BT848 based TVCapture, PCI
Millennium II, PCI
Clone NE2000, ISA at 0x320, irq 15
More information needed?
-- Best regards / Mvh., Steen Suder sysadm kollegie6400.dk"Don't fear Microsoft; fear the ignorance!"
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/