Set multimode error

Benjamin Close (linux@senet.com.au)
Thu, 7 Jan 1999 18:54:04 +1030 (CST)

Hi all,
Since the 2.2 series started I get an error at drive detection. The
drive still works. The problem also occurs with 2.0.35
If anyone has a patch/wants more info let me know.

CC & replies to benjsc@senet.com.au

apm: BIOS version 1.2 Flags 0x07 (Driver version 1.7)
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST31720A, ATA DISK drive
hdb: ST36531A, ATA DISK drive
hdc: MATSHITA CR-584, ATAPI CDROM drive
hdd: LS-120 VER4 07 UHD Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST31720A, 1626MB w/0kB Cache, CHS=826/64/63
hdb: ST36531A, 6204MB w/128kB Cache, CHS=840/240/63, (U)DMA
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Partition check:
hda: hda1 hda2 hda3
hdb:hdb: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hdb: set_multmode: error=0x04 { DriveStatusError }
hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 > hdb3 hdb4
VFS: Mounted root (ext2 filesystem) readonly.

-- 
                      ___   __
                     |___) |__ |\ |
                     |___) |__ | \|
                   Benjsc@senet.com.au






-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/