Re: 3c59x problem

John Heemstra (heemstra@sgi.com)
Thu, 14 Jan 1999 20:23:29 -0500


I Lee Hetherington wrote:
>
> Chris Wedgwood wrote:
>
> > Do you have a 3c590 or a 3c905 -- the later certainly doesn't work
> > with the new drivers, the former might.
>
> I'm happily running 2.2.0-pre7-ac2 SMP with a 3c905 and a 3c905b (separate
> machines) at 10Mb/s.

I'll second this, only with 2.2.0-pre7-ac3:

3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/
vortex.html
eth0: 3Com 3c900 Boomerang 10baseT at 0x7e80, 00:a0:24:d5:d7:35, IRQ 10
8K word-wide RAM 3:5 Rx:Tx split, 10baseT interface.
Enabling bus-master transmits and whole-frame receives.
eth1: 3Com 3c905 Boomerang 100baseTx at 0x7f00, 00:60:08:8d:48:ff, IRQ 11
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786d.
Enabling bus-master transmits and whole-frame receives.

> --Lee Hetherington

John

-( John Heemstra * heemstra@sgi.com * http://reality.sgi.com/heemstra )-

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/