ksymoops output:
Jan 18 15:39:19 nexus kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000400
Jan 18 15:39:19 nexus kernel: current->tss.cr3 = 01f01000, `r3 = 01f01000
Jan 18 15:39:19 nexus kernel: *pde = 00000000
Jan 18 15:39:19 nexus kernel: Oops: 0000
Jan 18 15:39:19 nexus kernel: CPU: 0
Jan 18 15:39:19 nexus kernel: EIP: 0010:[<c01247fe>]
Jan 18 15:39:19 nexus kernel: EFLAGS: 00010206
Jan 18 15:39:19 nexus kernel: eax: 00000400 ebx: 000144fa ecx: 00000b02 edx: 00000400
Jan 18 15:39:19 nexus kernel: esi: 00000800 edi: 00000800 ebp: 000144fa esp: c1f07cec
Jan 18 15:39:19 nexus kernel: ds: 0018 es: 0018 ss: 0018
Jan 18 15:39:19 nexus kernel: Process dd (pid: 612, process nr: 79, stackpage=c1f07000)
Jan 18 15:39:19 nexus kernel: Stack: c0124837 00000b02 000144fa 00000800 00000001 00000800 000144fa c1f00b02
Jan 18 15:39:19 nexus kernel: c0124acb 00000b02 000144fa 00000800 00000001 00000000 c1f07e90 c1f07e94
Jan 18 15:39:19 nexus kernel: 00000002 c0127c91 00000b02 000144fa 00000800 c1fcb140 0804c3da 0804c3da
Jan 18 15:39:19 nexus kernel: Call Trace: [<c0124837>] [<c0124acb>] [<c0127c91>] [<c010fcc3>] [<c01a085c>] [<c010fcc3>] [<c018cf5a>]
Jan 18 15:39:19 nexus kernel: [<c011053f>] [<c011053f>] [<c011060a>] [<c0116bb5>] [<c0109b75>] [<c0108a7c>] [<c01233da>] [<c01089e0>]
Jan 18 15:39:19 nexus kernel: Code: 8b 12 39 58 04 75 f3 39 70 08 75 ee 66 39 48 0c 75 e8 89 c2
>>EIP: c01247fe <find_buffer+2a/44>
Trace: c0124837 <get_hash_table+1f/60>
Trace: c0124acb <getblk+1f/224>
Trace: c0127c91 <block_read+30d/524>
Trace: c010fcc3 <schedule+1f3/21c>
Trace: c01a085c <aic7xxx_queue+148/158>
Trace: c010fcc3 <schedule+1f3/21c>
Trace: c018cf5a <scsi_ioctl+296/390>
Trace: c011053f <update_process_times+5b/64>
Code: c01247fe <find_buffer+2a/44> 00000000 <_EIP>: <===
Code: c01247fe <find_buffer+2a/44> 0: 8b 12 movl (%edx),%edx <===
Code: c0124800 <find_buffer+2c/44> 2: 39 58 04 cmpl %ebx,0x4(%eax)
Code: c0124803 <find_buffer+2f/44> 5: 75 f3 jne c01247f8 <find_buffer+24/44>
Code: c0124805 <find_buffer+31/44> 7: 39 70 08 cmpl %esi,0x8(%eax)
Code: c0124808 <find_buffer+34/44> a: 75 ee jne c01247f8 <find_buffer+24/44>
Code: c012480a <find_buffer+36/44> c: 66 39 48 0c cmpw %cx,0xc(%eax)
Code: c012480e <find_buffer+3a/44> 10: 75 e8 jne c01247f8 <find_buffer+24/44>
Code: c0124810 <find_buffer+3c/44> 12: 89 c2 movl %eax,%edx
/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 82437 (rev 2).
Medium devsel. Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371FB PIIX ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371FB PIIX IDE (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0x3000 [0x3001].
Bus 0, device 8, function 0:
SCSI storage controller: Adaptec AIC-7881U (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=32. Min Gnt=8.Max Lat=8.
I/O at 0x6000 [0x6001].
Non-prefetchable 32 bit memory at 0xf2000000 [0xf2000000].
Bus 0, device 9, function 0:
VGA compatible controller: S3 Inc. Vision 968 (rev 0).
Medium devsel. IRQ 10.
Non-prefetchable 32 bit memory at 0xf0000000 [0xf0000000].
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: CONNER Model: CFP2105S 2.14GB Rev: 2D4D
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:501 Rev: 2.2
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-6XCS Rev: 2.05
Type: CD-ROM ANSI SCSI revision: 02
/proc/scsi/aic7xxx/0
Adaptec AIC7xxx driver version: 5.1.10/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 3
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xf2000000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 11
SCBs: Active 0, Max Active 2,
Allocated 15, HW 16, Page 255
Interrupts: 20940
BIOS Control Word: 0x1894
Adapter Control Word: 0x001c
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 12
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi0:0:0:0)
Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
Transinfo settings: current(25/15/0), goal(25/15/0), user(25/15/0)
Total transfers 18040 (17820 reads and 220 writes)
(scsi0:0:1:0)
Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
Transinfo settings: current(25/15/0), goal(25/15/0), user(25/15/0)
Total transfers 2739 (2295 reads and 444 writes)
(scsi0:0:2:0)
Device using Narrow/Async transfers.
Transinfo settings: current(0/0/0), goal(0/0/0), user(0/0/0)
Total transfers 0 (0 reads and 0 writes)
(scsi0:0:3:0)
Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
Transinfo settings: current(25/15/0), goal(25/15/0), user(25/15/0)
Total transfers 0 (0 reads and 0 writes)
(scsi0:0:4:0)
Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
Transinfo settings: current(50/15/0), goal(25/15/0), user(25/15/0)
Total transfers 0 (0 reads and 0 writes)
Regards
Martin
1 warning issued. Results may not be reliable.
-- It is easier to write an incorrect program than understand a correct one.- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/