2.2.0-pre8: ATAPI-ZIP drive broken (ok in pre7)

Gerhard Fuellgrabe (linux-kernel-list@cacofonix.harz.de)
Wed, 20 Jan 1999 09:52:34 +0100


Hi.

I just compiled the 2.2.0-pre8 after working a few days with
pre7, and now the ZIP-drive refuses to work:

PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hdc: IOMEGA ZIP 100 ATAPI, ATAPI CDROM drive
hdd: LTN244, ATAPI CDROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid field in command packet -- (asc=0x24, ascq=0x00)
The failed "Mode Sense" packet command was:
"5a 00 2a 00 00 00 00 00 18 00 00 00 "

Regards,

Gerry

-- 
Gerhard Fuellgrabe            Phone: +49.5323.96788   Fax: 962044
Arnikaweg 34                  E-mail:      gerd@cacofonix.harz.de
D-38678 Clausthal-Zellerfeld  Ham-Radio: DK3NZ@DB0NHM.#NDS.DEU.EU
http://www.harz.de/home/fuellgrabe

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/