Re: IDE-SCSI only ; pre9, pre8 pre7ac7 all lock up on SCSI detection

Eloy A. Paris (eparis@ven.ra.rockwell.com)
21 Jan 1999 20:32:07 GMT

I am seeing this behavior too. Wasn't it in -pre8 when the fix to
ide-scsi to have only one LUN detected was rolled in (from the ac
patches, I think)?

peloy.-

Christoph Lameter <christoph@lameter.com> wrote:
> on pre7 I get the following kernel output
>
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
> Vendor: Memorex Model: CRW-1622 Rev: D2.3
> Type: CD-ROM ANSI SCSI revision: 02
> Detected scsi CD-ROM sr7 at scsi0, channel 0, id 0, lun 7
> scsi : detected 8 SCSI cdroms total.
> sr0: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> Uniform CDROM driver Revision: 2.51
> sr1: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> sr2: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> sr3: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> sr4: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> sr5: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> sr6: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
> sr7: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
>
> Pre9 etc only detect one CD-ROM (there only is one) and it says
>
> SCSI-Host detected 1:
>
> and then locks up.
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/