I recompiled the ide-tape driver with IDETAPE_DEBUG_LOG defined and am attaching the output. I'm willing to help debug any way I can, just let me know what I can do.
//-----------------------------------------------------------------------
Linux version 2.2.0 (root@fusion.fission.org) (gcc version 2.7.2.3) #12 Sat Jan 30 17:21:58 EST 1999
Detected 350802244 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 349.80 BogoMIPS
Memory: 128296k/131072k available (840k kernel code, 408k reserved, 1492k data, 36k init)
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL_TM1700A, ATA DISK drive
hdb: FUJITSU MPC3064AT, ATA DISK drive
hdc: CD-ROM CDU701, ATAPI CDROM drive
hdd: SuperStation-Int, ATAPI TAPE drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL_TM1700A, 1628MB w/76kB Cache, CHS=827/64/63, DMA
hdb: FUJITSU MPC3064AT, 6187MB w/0kB Cache, CHS=788/255/63, UDMA
hdc: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.52
Dumping ATAPI Identify Device tape parameters
Protocol Type: <6>ATAPI
Device Type: 1 - <6>Streaming Tape Device
Removable: Yes
Command Packet DRQ Type: <6>Accelerated DRQ
Command Packet Size: <6>12 bytes
Model: SuperStation-Int
Firmware Revision: 1.06
Serial Number:
Write buffer size: 0 bytes
DMA: No
LBA: Yes
IORDY can be disabled: No
IORDY supported: Yes
ATAPI overlap supported: No
PIO Cycle Timing Category: 2
DMA Cycle Timing Category: 0
Single Word DMA supported modes: <6>
Multi Word DMA supported modes: <6>
Enhanced PIO Modes: Mode 3
Minimum Multi-word DMA cycle per word: <6>Not supported
Manufacturer's Recommended Multi-word cycle: <6>Not supported
Minimum PIO cycle without IORDY: <6>240 ns
Minimum PIO cycle with IORDY: <6>180 ns
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=0
ide-tape: rq_stack_index=0
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 6, asc = 29, ascq = 0
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 1
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=1
ide-tape: rq_stack_index=1
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 2
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=2
ide-tape: rq_stack_index=2
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 3
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=3
ide-tape: rq_stack_index=3
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
ide-tape: ht0: I/O error, pc = 1a, key = 2, asc = 4, ascq = 1
ide-tape: Reached idetape_pc_callback
Reached idetape_end_request
ide-tape: Can't get tape parameters - assuming some default values
bloxk_size=0,speed=0, buffer_size=0
ide-tape: hdd <-> ht0, 450KBps, 6*26kB buffer, 2600kB pipeline, 140ms tDSC
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd000, 00:60:08:06:b2:8d, IRQ 10
8K word-wide RAM 3:5 Rx:Tx split, autoselect/10base2 interface.
Enabling bus-master transmits and whole-frame receives.
Partition check:
hda: hda1
hdb: hdb1 hdb2 hdb3 hdb4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 130748k swap-space (priority -1)
parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPEPP,ECPPS2]
lp0: using parport0 (interrupt-driven).
tty_io.c: process 289 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.16 detected OK (220)
Linux version 2.2.0 (root@fusion.fission.org) (gcc version 2.7.2.3) #12 Sat Jan 30 17:21:58 EST 1999
Detected 350802244 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 349.80 BogoMIPS
Memory: 128296k/131072k available (840k kernel code, 408k reserved, 1492k data, 36k init)
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL_TM1700A, ATA DISK drive
hdb: FUJITSU MPC3064AT, ATA DISK drive
hdc: CD-ROM CDU701, ATAPI CDROM drive
hdd: SuperStation-Int, ATAPI TAPE drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL_TM1700A, 1628MB w/76kB Cache, CHS=827/64/63, DMA
hdb: FUJITSU MPC3064AT, 6187MB w/0kB Cache, CHS=788/255/63, UDMA
hdc: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.52
Dumping ATAPI Identify Device tape parameters
Protocol Type: <6>ATAPI
Device Type: 1 - <6>Streaming Tape Device
Removable: Yes
Command Packet DRQ Type: <6>Accelerated DRQ
Command Packet Size: <6>12 bytes
Model: SuperStation-Int
Firmware Revision: 1.06
Serial Number:
Write buffer size: 0 bytes
DMA: No
LBA: Yes
IORDY can be disabled: No
IORDY supported: Yes
ATAPI overlap supported: No
PIO Cycle Timing Category: 2
DMA Cycle Timing Category: 0
Single Word DMA supported modes: <6>
Multi Word DMA supported modes: <6>
Enhanced PIO Modes: Mode 3
Minimum Multi-word DMA cycle per word: <6>Not supported
Manufacturer's Recommended Multi-word cycle: <6>Not supported
Minimum PIO cycle without IORDY: <6>240 ns
Minimum PIO cycle with IORDY: <6>180 ns
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=0
ide-tape: rq_stack_index=0
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 6, asc = 29, ascq = 0
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 1
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=1
ide-tape: rq_stack_index=1
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 2
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=2
ide-tape: rq_stack_index=2
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 3
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=3
ide-tape: rq_stack_index=3
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
ide-tape: ht0: I/O error, pc = 1a, key = 2, asc = 4, ascq = 1
ide-tape: Reached idetape_pc_callback
Reached idetape_end_request
ide-tape: Can't get tape parameters - assuming some default values
bloxk_size=0,speed=0, buffer_size=0
ide-tape: hdd <-> ht0, 450KBps, 6*26kB buffer, 2600kB pipeline, 140ms tDSC
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd000, 00:60:08:06:b2:8d, IRQ 10
8K word-wide RAM 3:5 Rx:Tx split, autoselect/10base2 interface.
Enabling bus-master transmits and whole-frame receives.
Partition check:
hda: hda1
hdb: hdb1 hdb2 hdb3 hdb4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 130748k swap-space (priority -1)
parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPEPP,ECPPS2]
lp0: using parport0 (interrupt-driven).
tty_io.c: process 289 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.16 detected OK (220)
Linux version 2.2.0 (root@fusion.fission.org) (gcc version 2.7.2.3) #12 Sat Jan 30 17:21:58 EST 1999
Detected 350802244 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 349.80 BogoMIPS
Memory: 128296k/131072k available (840k kernel code, 408k reserved, 1492k data, 36k init)
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALL_TM1700A, ATA DISK drive
hdb: FUJITSU MPC3064AT, ATA DISK drive
hdc: CD-ROM CDU701, ATAPI CDROM drive
hdd: SuperStation-Int, ATAPI TAPE drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALL_TM1700A, 1628MB w/76kB Cache, CHS=827/64/63, DMA
hdb: FUJITSU MPC3064AT, 6187MB w/0kB Cache, CHS=788/255/63, UDMA
hdc: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.52
Dumping ATAPI Identify Device tape parameters
Protocol Type: <6>ATAPI
Device Type: 1 - <6>Streaming Tape Device
Removable: Yes
Command Packet DRQ Type: <6>Accelerated DRQ
Command Packet Size: <6>12 bytes
Model: SuperStation-Int
Firmware Revision: 1.06
Serial Number:
Write buffer size: 0 bytes
DMA: No
LBA: Yes
IORDY can be disabled: No
IORDY supported: Yes
ATAPI overlap supported: No
PIO Cycle Timing Category: 2
DMA Cycle Timing Category: 0
Single Word DMA supported modes: <6>
Multi Word DMA supported modes: <6>
Enhanced PIO Modes: Mode 3
Minimum Multi-word DMA cycle per word: <6>Not supported
Manufacturer's Recommended Multi-word cycle: <6>Not supported
Minimum PIO cycle without IORDY: <6>240 ns
Minimum PIO cycle with IORDY: <6>180 ns
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=0
ide-tape: rq_stack_index=0
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 6, asc = 29, ascq = 0
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 1
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=1
ide-tape: rq_stack_index=1
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 2
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=2
ide-tape: rq_stack_index=2
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 3
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 0 bytes transferred
ide-tape: ht0: I/O error, <6>ide-tape: pc_stack_index=3
ide-tape: rq_stack_index=3
rq_status: 1, rq_dev: 5696, cmd: 90, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
Retry number - 0
ide-tape: Reached idetape_pc_intr interrupt handler
ide-tape: The tape wants to send us more data than expected - allowing transfer
ide-tape: Reached idetape_pc_intr interrupt handler
Packet command completed, 22 bytes transferred
ide-tape: Reached idetape_request_sense_callback
ide-tape: pc = 1a, sense key = 2, asc = 4, ascq = 1
Reached idetape_end_request
rq_status: 1, rq_dev: 5696, cmd: 91, errors: 0
sector: 0, nr_sectors: 0, current_nr_sectors: 0
ide-tape: ht0: I/O error, pc = 1a, key = 2, asc = 4, ascq = 1
ide-tape: Reached idetape_pc_callback
Reached idetape_end_request
ide-tape: Can't get tape parameters - assuming some default values
bloxk_size=0,speed=0, buffer_size=0
ide-tape: hdd <-> ht0, 450KBps, 6*26kB buffer, 2600kB pipeline, 140ms tDSC
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c900 Boomerang 10Mbps Combo at 0xd000, 00:60:08:06:b2:8d, IRQ 10
8K word-wide RAM 3:5 Rx:Tx split, autoselect/10base2 interface.
Enabling bus-master transmits and whole-frame receives.
Partition check:
hda: hda1
hdb: hdb1 hdb2 hdb3 hdb4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 130748k swap-space (priority -1)
parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPEPP,ECPPS2]
lp0: using parport0 (interrupt-driven).
tty_io.c: process 289 (gpm) used obsolete /dev/cua0 - update software to use /dev/ttyS0
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
SB 4.16 detected OK (220)
//-------------------------------------------------------------------------
-- Mike Mangino Senior Programmer/Analyst mangino@cis.ohio-state.edu manginom@oclc.org Home: (614) 299-4322 Work: (614) 764-6280- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/