Re: Writing a CD on a CRW1622 using IDE SCSI is broken in 2.2.X

Christoph Lameter (christoph@lameter.com)
Thu, 18 Mar 1999 21:00:10 -0800 (PST)


Strange. Very strange. Can you sent me your .config from /usr/src/linux?
I have a Cyrix 200 but it worked fine on 2.0.35.

On Thu, 18 Mar 1999, Erick Kinnee wrote:

> On Thu, Mar 18, 1999 at 01:11:11PM -0800, Christoph Lameter wrote:
> > Let me qualify that further. It seems that other CD-Writers such as HP
> > work under 2.2.X but not the CRW1622.
>
> Dang. Guess I'll have to tell my CRW1622 to stop working since it's not supposed to be...
>
> Linux cerb 2.2.3-ac1 #4 Wed Mar 17 18:47:42 CST 1999
> One Intel 199MHz processor, 79.67 total bogomips, 64M RAM
> System library 2.1.1
>
> hda: Maxtor 90680D4, ATA DISK drive
> hdb: QUANTUM FIREBALL EX6.4A, ATA DISK drive
> hdc: Memorex CRW-1622, ATAPI CDROM drive
> hdd: FX240S, ATAPI CDROM drive
>
> cerb:~# modprobe ide-scsi
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> scsi : 1 host.
> Vendor: Memorex Model: CRW-1622 Rev: D4.0
> Type: CD-ROM ANSI SCSI revision: 02
> Vendor: MITSUMI Model: CD-ROM FX240S !B Rev: j01
> Type: CD-ROM ANSI SCSI revision: 02
>
> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
> sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
> sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>
> Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling
> scsidev: '0,0'
> scsibus: 0 target: 0 lun: 0
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'Memorex '
> Identifikation : 'CRW-1622 '
> Revision : 'D4.0'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Starting to write CD at speed 2 in write mode for single session.
> Last chance to quit, starting real write in 1 seconds.
> Track 01: Total bytes read/written: 68898816/68929536 (33657 sectors).
>
> cerb:/# mount -t iso9660 /dev/scd0 /cdrom
> mount: block device /dev/scd0 is write-protected, mounting read-only
>
> Like I said, works fine here...
>
> --
> __ _
> Erick Kinnee | -o) / / (_)__ __ ____ __
> Burleson, TX | /\\/ /__/ / _ \/ // /\ \/ /
> mailto:cerb@debian.org | _\_v____/_/_//_/\_,_/ /_/\_\
> Debian GNU/Linux Developer | http://www.debian.org
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/