Not booting
[2.] Full description of the problem/report:
After compiling kernel 2.2.5, running lilo & restarting, The kernel
uncompresses ok, I get the message all`s ok, and booting kernel, nothing
happens for 30 seconds, then lots of disk activity, followed by a reboot.
[3.] Keywords (i.e., modules, networking, kernel):
kernel
[4.] Kernel version (from /proc/version):
2.2.5
previously (& currently) running....
Linux version 2.0.36 (root@heart-of-lothian) (gcc version 2.7.2.3) #93 Fri Feb 5
13:52:10 GMT 1999
[7.] Environment
Cyrix P233, Graphics Blaster Eclipse video card, Sound blaster AWE64 sound,
Canopus 3dfx card, 96 meg ram, advansys scsi card, 2 gig scsi hard disk, 8 gig
ide hard disc.
[7.1.] Software (add the output of the ver_linux script here)
Linux hailesmail 2.0.36 #93 Fri Feb 5 13:52:10 GMT 1999 i686 unknown
Kernel modules 2.1.121
Gnu C 2.7.2.3
Binutils 2.9.1.0.15
Linux C Library 2.0.7
Dynamic linker ldd (GNU libc) 2.0.7
Linux C++ Library 2.8.0
Procps 1.2.9
Mount 2.8a
Net-tools (1999-01-01)
Kbd 0.96
Sh-utils 1.16
Modules Loaded vmnet vmmon awe_wave sb uart401 sound soundlow soundcore
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
cpu : 686
model : M II
vendor_id : CyrixInstead
stepping : 2.8, core/bus clock ratio: 3x
fdiv_bug : no
hlt_bug : no
f00f_bug : no
fpu : yes
fpu_exception : yes
cpuid : yes
wp : yes
flags : fpu de tsc msr cx8 pge cmov mmx
bogomips : 200.29
[7.3.] Module information (from /proc/modules):
vmnet 3 3
vmmon 3 0
awe_wave 11 0
sb 6 0
uart401 2 [sb] 0
sound 15 [awe_wave sb uart401] 0
soundlow 1 [sound] 0
soundcore 1 [sb sound] 7
[7.4.] SCSI information (from /proc/scsi/scsi)
AdvanSys SCSI 3.1E: PCI Ultra 16 CDB: IO F400/F, IRQ 11
Device Information for AdvanSys SCSI Host 0:
Target IDs Detected: 1, 3, 4, 7, (7=Host Adapter)
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: CONNER Model: CFP2107E 2.14GB Rev: 1524
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: SyQuest Model: EZ135S Rev: 1-17
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PHILIPS Model: CDD2600 Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
EEPROM Settings for AdvanSys SCSI Host 0:
Serial Number Signature Not Present.
Host SCSI ID: 7, Host Queue Size: 16, Device Queue Size: 8
cntl 7f00, no_scam 0
Target ID: 0 1 2 3 4 5 6 7
Disconnects: Y Y Y Y Y Y Y Y
Command Queuing: N N N N N N N N
Start Motor: Y Y Y Y Y Y Y Y
Synchronous Transfer: N Y N Y N N N N
Linux Driver Configuration and Information for AdvanSys SCSI Host 0:
host_busy 0, last_reset 0, max_id 8, max_lun 8, max_channel 0
unique_id 0, can_queue 16, this_id 7, sg_tablesize 50, cmd_per_lun 0
unchecked_isa_dma 0, use_clustering 1, loaded_as_module 0
flags 8, last_reset 0, jiffies 1ff92
queue_depth: 1:4 3:4 4:4
Linux Driver Statistics for AdvanSys SCSI Host 0:
command 0, queuecommand 2390, abort 0, reset 0, biosparam 0
interrupt 2395, callback 2390, done 2390
exe_noerror 2390, exe_busy 0, exe_error 0, exe_unknown 0
build_error 0
cont_cnt 1937, cont_xfer 2804.5 kb avg_xfer 1.4 kb
sg_cnt 453, sg_elem 1173, sg_xfer 3434.0 kb
avg_num_elem 2.5, avg_elem_size 2.9 kb, avg_xfer_size 7.5 kb
Active and Waiting Request Queues (Time Unit: 100 HZ):
target 1
active: cnt [cur 0, max 4, tot 2378], time [min 0, max 6, avg 1.1]
waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0]
target 3
active: cnt [cur 0, max 1, tot 6], time [min 0, max 1, avg 0.1]
waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0]
target 4
active: cnt [cur 0, max 1, tot 2], time [min 0, max 1, avg 0.5]
waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0]
Asc Library Configuration and Statistics for AdvanSys SCSI Host 0:
chip_version 11, lib_version 116, lib_serial_no 113, mcode_date 1091
mcode_version 50a, err_code 0
Total Command Pending: 0
Command Queuing: 1:N 3:N 4:N
Command Queue Pending: 1:0 3:0 4:0
Command Queue Limit: 1:4 3:4 4:4
Command Queue Full: 1:N 3:N 4:N
Synchronous Transfer: 1:Y 3:Y 4:N
1: Transfer Period Factor: 25 (10.0 Mhz), REQ/ACK Offset: 15
3: Transfer Period Factor: 50 (5.0 Mhz), REQ/ACK Offset: 15
Thanks in advance.
-- Cheers /\ /--\NDY http://www.hailesmail.netThe home of `Echoes of Insanity' & `Begin Linux' Mailing Lists
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/