Morning bug in eepro100.o [EtherExpress pro/100] in 2.2.5 w/o SMP

Michael Nelson (grussell@wiley.com)
Wed, 7 Apr 1999 11:36:15 -0400

This card has worked fine for me for a while, but since upgrading to 2.2.5
the network device
in nonfunctional when I come in to work in the morning. I don't have SMP
turned on in the kernel.

I don't have the eepro100 compiled as a module. I'll rebuild it as such for
tomorrow, so I can see it un- and
re-loading it will fix it.

Here is a section out of /proc/pci:
Bus 0, device 20, function 0:
Ethernet controller: Intel 82557 (rev 5).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable.
Latency=64. Min Gnt=8.Max Lat=56.
Prefetchable 32 bit memory at 0xf3dff000 [0xf3dff008].
I/O at 0x7c60 [0x7c61].
Non-prefetchable 32 bit memory at 0xf3f00000 [0xf3f00000].

here is my ifconfig:
eth0 Link encap:Ethernet HWaddr 00:04:AC:36:E0:20
inet addr:199.171.201.112 Bcast:199.171.201.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2543873 errors:23 dropped:0 overruns:7 frame:27
TX packets:367230 errors:2400 dropped:0 overruns:1 carrier:0
collisions:372223

Please let me know anything that I should do inorder to discover more.
Thanks
Gabriel Russell

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/