channel 0, id 1, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17781964 [8682 MB] [8.7 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8386733 [4095 MB] [4.1 GB]
eth0: 3Com 3c905B Cyclone 100baseTx at 0xd000, 00:10:4b:cc:22:29, IRQ 10
8K byte-wide RAM 5:3 Rx:Tx split, NWay Autonegotiation interface.
Enabling bus-master transmits and whole-frame receives.
3c59x.c:v0.99E 5/12/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Partition check:
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sdb: sdb1
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 128516k swap-space (priority -1)
scsi : aborting command due to timeout : pid 7714, scsi0, channel 0, id 0, lun 0 Read (6) 15 ec e0 78 00
scsi0 : DANGER : command running, can not abort.
scsi : aborting command due to timeout : pid 7714, scsi0, channel 0, id 0, lun 0 Read (6) 15 ec e0 78 00
scsi0 : DANGER : command running, can not abort.
SCSI host 0 abort (pid 7714) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi0 : DCMD|DBC=0x50000000, DNAD=0x3b8c5c (virt 0x003b8c5c)
DSA=0x861e8 (virt 0x000861e8)
DSPS=0x3b8d6c, TEMP=0x3b87c0 (virt 0x003b87c0), DMODE=0xc8
SXFER=0x8, SCNTL3=0x13
phase=MSGIN, 0 bytes in SCSI FIFO
STEST0=0x76
scsi0 : DSP 0x3b8c54 (virt 0x003b8c54) ->
0x3b8c54 (virt 0x003b8c54) : 0x50000000 0x003b8d6c (virt 0x003b8d6c)
0x3b8c5c (virt 0x003b8c5c) : 0x60000200 0x00000000 (virt 0x00000000)
0x3b8c64 (virt 0x003b8c64) : 0x7838c800 0x00000000 (virt 0x00000000)
0x3b8c6c (virt 0x003b8c6c) : 0x0f000001 0x003b85d8 (virt 0x003b85d8)
0x3b8c74 (virt 0x003b8c74) : 0x7838d800 0x00000000 (virt 0x00000000)
0x3b8c7c (virt 0x003b8c7c) : 0xc0000004 0x003b85d4 (virt 0x003b85d4) 0x0000b834 (virt 0x0000b834)
scsi0 : issue queue
scsi0 : schedule dsa array :
scsi0 : end schedule dsa array
scsi0 : reconnect_dsa_head :
scsi0 : dsa at phys 0x861e8 (virt 0x000861e8)
+ 64 : dsa_msgout length = 1, data = 0x8602c (virt 0x0008602c)
Identify disconnect allowed lun 0
+ 60 : select_indirect = 0x13010800
+ 56 : dsa_cmnd = 0x3bc018 result = 0xffff, target = 1, lun = 0, cmd = Read (6) 0f 40 58 78 00
+ 48 : dsa_next = 0x881e8
scsi0 target 1 : sxfer_sanity = 0x8, scntl3_sanity = 0x13
script : 0x78031300 0x0 0x78050800 0x0 0x90080000 0x0 0x0 0x0
scsi0 : saved data pointer at offset 0
scsi0 : can't determine active data pointer offset
0x3b8854 (virt 0x003b8854) : 0x820b0000 0x003b884c (virt 0x003b884c)
0x3b885c (virt 0x003b885c) : 0x8f0b0000 0x003b8a04 (virt 0x003b8a04)
scsi0 : dsa at phys 0x881e8 (virt 0x000881e8)
+ 64 : dsa_msgout length = 1, data = 0x8802c (virt 0x0008802c)
Identify disconnect allowed lun 0
+ 60 : select_indirect = 0x13000800
+ 56 : dsa_cmnd = 0x6a04 result = 0xffff, target = 0, lun = 0, cmd = Read (6) 15 ec e0 78 00
+ 48 : dsa_next = 0x0
scsi0 target 0 : sxfer_sanity = 0x8, scntl3_sanity = 0x13
script : 0x78031300 0x0 0x78050800 0x0 0x90080000 0x0 0x0 0x0
scsi0 : saved data pointer at offset 0
scsi0 : can't determine active data pointer offset
0x3b8854 (virt 0x003b8854) : 0x820b0000 0x003b884c (virt 0x003b884c)
0x3b885c (virt 0x003b885c) : 0x8f0b0000 0x003b8a04 (virt 0x003b8a04)
scsi0 : end reconnect_dsa_head
The sti() implicit in a printk() prevents hangs
scsi0 : target 0 accepting period 100ns offset 8 10.00MHz FAST SCSI-II
scsi0 : setting target 0 to period 100ns offset 8 10.00MHz FAST SCSI-II
scsi : aborting command due to timeout : pid 14159, scsi0, channel 0, id 1, lun 0 Read (6) 0f 40 58 78 00
scsi0 : did this command ever run?
scsi0 : target 1 accepting period 100ns offset 8 10.00MHz FAST SCSI-II
scsi0 : setting target 1 to period 100ns offset 8 10.00MHz FAST SCSI-II
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/