Re: lspci/oldproc new card

Martin Mares (mj@ucw.cz)
Mon, 31 May 1999 11:53:02 +0200


Hello!

> i got some 16 Port PCI Serial Controllercards - Manual says compatible to
> Windows NT and Solaris.
>
> Board say Aurora Technologies Inc., Aries 16000P
>
> There is a big PLX Chip on the Board (I think PCI Bridge or something)
> saying PCI9060SD REV1A
>
> 00:0b.0 Communication controller: PLX Technology, Inc.: Unknown device 906d (rev 02)
> Subsystem: Unknown device 125c:0640
> Flags: bus master, medium devsel, latency 32, IRQ 11
> Memory at f3800000 (32-bit, non-prefetchable)
> I/O ports at e000
> Memory at f3000000 (32-bit, non-prefetchable)
>
> Just to be included in the lspci/oldproc interface and/or someone may enlighten me

Already included in pciutils-2.0 :)

> if someone else works on a driver or knows what this chip is ...

PLX9060SD is a generic PCI controller chip, so it won't reveal anything
about how does the card really work. I suspect there exists no Linux driver.
Can you look at the other chips on the card?

Have a nice fortnight

-- 
Martin `MJ' Mares   <mj@ucw.cz>   http://atrey.karlin.mff.cuni.cz/~mj/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
"Never make any mistaeks."

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/