Here are the logs from this incident:
Jun 18 22:45:01 p6 syslogd 1.3-3: restart.
Jun 18 22:45:01 p6 syslog: syslogd startup succeeded
Jun 18 22:45:01 p6 kernel: klogd 1.3-3, log source = /proc/kmsg started.
Jun 18 22:45:01 p6 kernel: Inspecting /boot/System.map-2.2.10
Jun 18 22:45:01 p6 syslog: klogd startup succeeded
Jun 18 22:45:02 p6 kernel: Loaded 8226 symbols from
/boot/System.map-2.2.10.
Jun 18 22:45:02 p6 kernel: Symbols match kernel version 2.2.10.
Jun 18 22:45:02 p6 kernel: Loaded 2 symbols from 3 modules.
Jun 18 22:45:02 p6 kernel: Linux version 2.2.10 (root@p6.pipehead.org)
(gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP
Tue Jun 15 18:07:59 CDT 1999
Jun 18 22:45:02 p6 kernel: Intel MultiProcessor Specification v1.1
Jun 18 22:45:02 p6 kernel: Virtual Wire compatibility mode.
Jun 18 22:45:02 p6 kernel: OEM ID: INTEL Product ID: 440BX
APIC at: 0xFEE00000
Jun 18 22:45:02 p6 kernel: Processor #0 Pentium(tm) Pro APIC version 17
Jun 18 22:45:02 p6 kernel: Processor #1 Pentium(tm) Pro APIC version 17
Jun 18 22:45:02 p6 kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Jun 18 22:45:02 p6 kernel: Processors: 2
Jun 18 22:45:02 p6 kernel: mapped APIC to ffffe000 (fee00000)
Jun 18 22:45:02 p6 kernel: mapped IOAPIC to ffffd000 (fec00000)
Jun 18 22:45:02 p6 kernel: Detected 400916850 Hz processor.
Jun 18 22:45:02 p6 kernel: Console: colour VGA+ 80x25
Jun 18 22:45:02 p6 kernel: Calibrating delay loop... 399.77 BogoMIPS
Jun 18 22:45:02 p6 kernel: Memory: 127540k/131072k available (1356k
kernel code, 416k reserved, 1692k data, 68k init)
Jun 18 22:45:02 p6 kernel: VFS: Diskquotas version dquot_6.4.0
initialized
Jun 18 22:45:02 p6 kernel: Checking 386/387 coupling... OK, FPU using
exception 16 error reporting.
Jun 18 22:45:02 p6 kernel: Checking 'hlt' instruction... OK.
Jun 18 22:45:02 p6 kernel: POSIX conformance testing by UNIFIX
Jun 18 22:45:02 p6 kernel: mtrr: v1.35 (19990512) Richard Gooch
(rgooch@atnf.csiro.au)
Jun 18 22:45:02 p6 kernel: per-CPU timeslice cutoff: 100.22 usecs.
Jun 18 22:45:02 p6 kernel: CPU0: Intel Pentium II (Deschutes) stepping
01
Jun 18 22:45:02 p6 kernel: calibrating APIC timer ...
Jun 18 22:45:02 p6 kernel: ..... CPU clock speed is 400.9177 MHz.
Jun 18 22:45:02 p6 kernel: ..... system bus clock speed is 100.2292 MHz.
Jun 18 22:45:02 p6 kernel: Booting processor 1 eip 2000
Jun 18 22:45:02 p6 kernel: Calibrating delay loop... 400.59 BogoMIPS
Jun 18 22:45:02 p6 kernel: OK.
Jun 18 22:45:02 p6 kernel: CPU1: Intel Pentium II (Deschutes) stepping
01
Jun 18 22:45:02 p6 kernel: Total of 2 processors activated (800.36
BogoMIPS).
Jun 18 22:45:02 p6 kernel: enabling symmetric IO mode... ...done.
Jun 18 22:45:02 p6 kernel: ENABLING IO-APIC IRQs
Jun 18 22:45:02 p6 kernel: init IO_APIC IRQs
Jun 18 22:45:02 p6 kernel: IO-APIC pin 0, 5, 10, 11, 15, 20, 21, 22, 23
not connected.
Jun 18 22:45:02 p6 kernel: number of MP IRQ sources: 17.
Jun 18 22:45:02 p6 kernel: number of IO-APIC registers: 24.
Jun 18 22:45:02 p6 kernel: testing the IO APIC.......................
Jun 18 22:45:02 p6 kernel: .... register #00: 02000000
Jun 18 22:45:02 p6 kernel: ....... : physical APIC id: 02
Jun 18 22:45:02 p6 kernel: .... register #01: 00170011
Jun 18 22:45:02 p6 kernel: ....... : max redirection entries: 0017
Jun 18 22:45:02 p6 kernel: ....... : IO APIC version: 0011
Jun 18 22:45:02 p6 kernel: .... register #02: 00000000
Jun 18 22:45:02 p6 kernel: ....... : arbitration: 00
Jun 18 22:45:02 p6 kernel: .... IRQ redirection table:
Jun 18 22:45:02 p6 atd: atd startup succeeded
Jun 18 22:45:02 p6 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli
Vect:
Jun 18 22:45:02 p6 kernel: 00 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 01 000 00 0 0 0 0 0 1 1
59
Jun 18 22:45:02 p6 kernel: 02 0FF 0F 0 0 0 0 0 1 1
51
Jun 18 22:45:02 p6 kernel: 03 000 00 0 0 0 0 0 1 1
61
Jun 18 22:45:02 p6 kernel: 04 000 00 0 0 0 0 0 1 1
69
Jun 18 22:45:02 p6 kernel: 05 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 06 000 00 0 0 0 0 0 1 1
71
Jun 18 22:45:02 p6 kernel: 07 000 00 0 0 0 0 0 1 1
79
Jun 18 22:45:02 p6 kernel: 08 000 00 0 0 0 0 0 1 1
81
Jun 18 22:45:02 p6 kernel: 09 000 00 0 0 0 0 0 1 1
89
Jun 18 22:45:02 p6 kernel: 0a 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 0b 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 0c 000 00 0 0 0 0 0 1 1
91
Jun 18 22:45:02 p6 kernel: 0d 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 0e 000 00 0 0 0 0 0 1 1
99
Jun 18 22:45:02 p6 kernel: 0f 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 10 0FF 0F 1 1 0 1 0 1 1
A1
Jun 18 22:45:02 p6 kernel: 11 0FF 0F 1 1 0 1 0 1 1
A9
Jun 18 22:45:02 p6 kernel: 12 0FF 0F 1 1 0 1 0 1 1
B1
Jun 18 22:45:02 p6 kernel: 13 0FF 0F 1 1 0 1 0 1 1
B9
Jun 18 22:45:02 p6 kernel: 14 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 15 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 16 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 kernel: 17 000 00 1 0 0 0 0 0 0
00
Jun 18 22:45:02 p6 crond: crond startup succeeded
Jun 18 22:45:02 p6 kernel: .................................... done.
Jun 18 22:45:02 p6 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb81
Jun 18 22:45:02 p6 kernel: PCI: Using configuration type 1
Jun 18 22:45:02 p6 kernel: PCI: Probing PCI hardware
Jun 18 22:45:02 p6 kernel: Linux NET4.0 for Linux 2.2
Jun 18 22:45:02 p6 kernel: Based upon Swansea University Computer
Society NET3.039
Jun 18 22:45:02 p6 kernel: NET4: Unix domain sockets 1.0 for Linux
NET4.0.
Jun 18 22:45:02 p6 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jun 18 22:45:02 p6 rc: Starting pcmcia succeeded
Jun 18 22:45:02 p6 kernel: IP Protocols: ICMP, UDP, TCP
Jun 18 22:45:02 p6 kernel: Initializing RT netlink socket
Jun 18 22:45:02 p6 kernel: Starting kswapd v 1.5
Jun 18 22:45:02 p6 kernel: Detected PS/2 Mouse Port.
Jun 18 22:45:02 p6 kernel: Serial driver version 4.27 with no serial
options enabled
Jun 18 22:45:02 p6 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Jun 18 22:45:02 p6 kernel: pty: 256 Unix98 ptys configured
Jun 18 22:45:02 p6 kernel: Real Time Clock Driver v1.09
Jun 18 22:45:02 p6 kernel: Non-volatile memory driver v1.0
Jun 18 22:45:02 p6 kernel: RAM disk driver initialized: 16 RAM disks of
4096K size
Jun 18 22:45:02 p6 kernel: PIIX4: IDE controller on PCI bus 00 dev 39
Jun 18 22:45:02 p6 kernel: PIIX4: device not capable of full native PCI
mode
Jun 18 22:45:02 p6 kernel: PIIX4: device disabled (BIOS)
Jun 18 22:45:02 p6 kernel: Floppy drive(s): fd0 is 1.44M
Jun 18 22:45:02 p6 kernel: FDC 0 is a post-1991 82077
Jun 18 17:44:54 p6 rc.sysinit: Loading default keymap succeeded
Jun 18 17:44:55 p6 rc.sysinit: Setting default font succeeded
Jun 18 17:44:55 p6 swapon: swapon: warning: /dev/sdb5 has insecure
permissions 0660, 0600 suggested
Jun 18 17:44:55 p6 rc.sysinit: Activating swap partitions succeeded
Jun 18 17:44:55 p6 rc.sysinit: Setting hostname p6.pipehead.org
succeeded
Jun 18 17:44:55 p6 fsck: /dev/sdb7: clean, 64598/1024000 files,
1612482/4088511 blocks
Jun 18 17:44:55 p6 rc.sysinit: Checking root filesystem succeeded
Jun 18 17:44:55 p6 rc.sysinit: Remounting root filesystem in read-write
mode succeeded
Jun 18 17:44:55 p6 rc.sysinit: Finding module dependencies succeeded
Jun 18 17:44:55 p6 fsck: /dev/sdb6: clean, 245/102800 files,
25510/409601 blocks
Jun 18 17:44:55 p6 rc.sysinit: Checking filesystems succeeded
Jun 18 22:45:02 p6 kernel: (scsi0) <Adaptec AIC-7895 Ultra SCSI host
adapter> found at PCI 14/0
Jun 18 22:45:02 p6 kernel: (scsi0) Wide Channel A, SCSI ID=7, 32/255
SCBs
Jun 18 22:45:02 p6 kernel: (scsi0) Warning - detected auto-termination
Jun 18 22:45:02 p6 kernel: (scsi0) Please verify driver detected
settings are correct.
Jun 18 22:45:02 p6 kernel: (scsi0) If not, then please properly set the
device termination
Jun 18 22:45:02 p6 kernel: (scsi0) in the Adaptec SCSI BIOS by hitting
CTRL-A when prompted
Jun 18 22:45:02 p6 kernel: (scsi0) during machine bootup.
Jun 18 22:45:02 p6 kernel: (scsi0) Cables present (Int-50 NO, Int-68 NO,
Ext-68 NO)
Jun 18 22:45:02 p6 kernel: (scsi0) Downloading sequencer code... 374
instructions downloaded
Jun 18 22:45:02 p6 kernel: (scsi1) <Adaptec AIC-7895 Ultra SCSI host
adapter> found at PCI 14/1
Jun 18 22:45:02 p6 kernel: (scsi1) Wide Channel B, SCSI ID=7, 32/255
SCBs
Jun 18 22:45:02 p6 kernel: (scsi1) Warning - detected auto-termination
Jun 18 22:45:02 p6 kernel: (scsi1) Please verify driver detected
settings are correct.
Jun 18 17:44:56 p6 rc.sysinit: Mounting local filesystems succeeded
Jun 18 17:44:56 p6 rc.sysinit: Turning on user and group quotas for
local filesystems succeeded
Jun 18 22:44:59 p6 date: Fri Jun 18 22:44:59 CDT 1999
Jun 18 22:44:59 p6 rc.sysinit: Setting clock : Fri Jun 18 22:44:59 CDT
1999 succeeded
Jun 18 22:44:59 p6 rc.sysinit: Enabling swap space succeeded
Jun 18 22:44:59 p6 init: Entering runlevel: 5
Jun 18 22:44:59 p6 network: Enabling IPv4 packet forwarding succeeded
Jun 18 22:45:00 p6 network: Bringing up interface lo succeeded
Jun 18 22:45:01 p6 network: Bringing up interface eth0 succeeded
Jun 18 22:45:01 p6 portmap: portmap startup succeeded
Jun 18 22:45:01 p6 netfs: Mounting other filesystems succeeded
Jun 18 22:45:01 p6 random: Initializing random number generator
succeeded
Jun 18 22:45:03 p6 inet: inetd startup succeeded
Jun 18 22:45:02 p6 kernel: (scsi1) If not, then please properly set the
device termination
Jun 18 22:45:02 p6 kernel: (scsi1) in the Adaptec SCSI BIOS by hitting
CTRL-A when prompted
Jun 18 22:45:02 p6 kernel: (scsi1) during machine bootup.
Jun 18 22:45:02 p6 kernel: (scsi1) Cables present (Int-50 NO, Int-68 NO,
Ext-68 NO)
Jun 18 22:45:02 p6 kernel: (scsi1) Downloading sequencer code... 374
instructions downloaded
Jun 18 22:45:02 p6 kernel: scsi0 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4
Jun 18 22:45:02 p6 kernel: <Adaptec AIC-7895 Ultra SCSI host
adapter>
Jun 18 22:45:02 p6 kernel: scsi1 : Adaptec AHA274x/284x/294x
(EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4
Jun 18 22:45:02 p6 kernel: <Adaptec AIC-7895 Ultra SCSI host
adapter>
Jun 18 22:45:02 p6 kernel: scsi : 2 hosts.
Jun 18 22:45:02 p6 kernel: (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec,
offset 15.
Jun 18 22:45:02 p6 kernel: Vendor: PLEXTOR Model: CD-ROM PX-20TS
Rev: 1.01
Jun 18 22:45:03 p6 snmpd: snmpd startup succeeded
Jun 18 22:45:02 p6 kernel: Type: CD-ROM
ANSI SCSI revision: 02
Jun 18 22:45:02 p6 kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0,
id 3, lun 0
Jun 18 22:45:02 p6 kernel: Vendor: RICOH Model: MP6200S
Rev: 1.20
Jun 18 22:45:02 p6 kernel: Type: CD-ROM
ANSI SCSI revision: 02
Jun 18 22:45:02 p6 kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0,
id 4, lun 0
Jun 18 22:45:02 p6 kernel: (scsi1:0:6:0) Synchronous at 40.0 Mbyte/sec,
offset 8.
Jun 18 22:45:02 p6 kernel: Vendor: IBM Model: DDRS-39130W
Rev: S92A
Jun 18 22:45:02 p6 kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jun 18 22:45:02 p6 kernel: Detected scsi disk sda at scsi1, channel 0,
id 6, lun 0
Jun 18 22:45:02 p6 kernel: (scsi1:0:8:0) Synchronous at 40.0 Mbyte/sec,
offset 8.
Jun 18 22:45:02 p6 kernel: Vendor: IBM Model: DDRS-39130W
Rev: S97B
Jun 18 22:45:02 p6 kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jun 18 22:45:03 p6 lpd: lpd startup succeeded
Jun 18 22:45:02 p6 kernel: Detected scsi disk sdb at scsi1, channel 0,
id 8, lun 0
Jun 18 22:45:02 p6 kernel: scsi : detected 2 SCSI cdroms 2 SCSI disks
total.
Jun 18 22:45:02 p6 kernel: Uniform CDROM driver Revision: 2.55
Jun 18 22:45:02 p6 kernel: sr1: scsi3-mmc drive: 6x/6x writer cd/rw
xa/form2 cdda tray
Jun 18 22:45:02 p6 kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 17850000 [8715 MB] [8.7 GB]
Jun 18 22:45:02 p6 kernel: SCSI device sdb: hdwr sector= 512 bytes.
Sectors= 17850000 [8715 MB] [8.7 GB]
Jun 18 22:45:02 p6 kernel: Partition check:
Jun 18 22:45:02 p6 kernel: sda: sda1 sda2 < sda5 sda6 sda7 >
Jun 18 22:45:02 p6 kernel: sdb: sdb1! sdb3 < sdb5 sdb6 sdb7 > < sdb8
sdb9 sdb10 >
Jun 18 22:45:02 p6 kernel: NTFS version 990411
Jun 18 22:45:02 p6 kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jun 18 22:45:02 p6 kernel: Freeing unused kernel memory: 68k freed
Jun 18 22:45:02 p6 kernel: Adding Swap: 120452k swap-space (priority -1)
Jun 18 22:45:04 p6 nfs: Starting NFS services: succeeded
Jun 18 22:45:02 p6 kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Jun 18 22:45:02 p6 kernel: eth0: 3Com 3c900 Boomerang 10baseT at
0xef00, 00:10:4b:d5:71:f9, IRQ 11
Jun 18 22:45:02 p6 kernel: 8K word-wide RAM 3:5 Rx:Tx split,
autoselect/10baseT interface.
Jun 18 22:45:02 p6 kernel: Enabling bus-master transmits and
whole-frame receives.
Jun 18 22:45:04 p6 nfs: rpc.statd startup succeeded
Jun 18 22:45:05 p6 nfs: rpc.rquotad startup succeeded
Jun 18 22:45:05 p6 nfs: rpc.mountd startup succeeded
Jun 18 22:45:06 p6 nfs: rpc.nfsd startup succeeded
Jun 18 22:45:06 p6 keytable: Loading keymap:
Jun 18 22:45:06 p6 keytable: Loading
/usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
Jun 18 22:45:06 p6 keytable: Loading system font:
Jun 18 22:45:07 p6 rc: Starting keytable succeeded
Jun 18 22:45:07 p6 sendmail: sendmail startup succeeded
Jun 18 22:45:07 p6 gpm: gpm startup succeeded
Jun 18 22:45:08 p6 httpd: httpd startup succeeded
Jun 18 22:45:08 p6 PAM_pwdb[533]: (su) session opened for user xfs by
(uid=0)
Jun 18 22:45:09 p6 PAM_pwdb[533]: (su) session closed for user xfs
Jun 18 22:45:09 p6 xfs: xfs startup succeeded
Jun 18 22:45:10 p6 smb: smbd startup succeeded
Jun 18 22:45:10 p6 smb: nmbd startup succeeded
Jun 18 22:45:10 p6 linuxconf: Linuxconf final setup
Jun 18 22:45:10 p6 rc: Starting linuxconf succeeded
Jun 18 22:45:10 p6 rc: Starting local succeeded
Jun 19 04:02:25 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:25 p6 kernel: 08:17: rw=2, want=1018676027, limit=4088511
Jun 19 04:02:25 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:25 p6 kernel: 08:17: rw=2, want=1026494214, limit=4088511
Jun 19 04:02:25 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:25 p6 kernel: 08:17: rw=2, want=1017447151, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1018676027, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1026494214, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1017447151, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1016766659, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1018676027, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1026494214, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1017447151, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1016766659, limit=4088511
Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device
Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1024761062, limit=4088511
Jun 19 07:07:50 p6 kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid
during SELTO.
Jun 19 07:07:50 p6 kernel: SCSISEQ = 0x5a SEQADDR = 0x7 SSTAT0 =
0x15 SSTAT1 = 0x8a
Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid
46975, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 93 92 23 00 00 02
00
Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid
46977, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 b3 52 49 00 00 02
00
Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid
46978, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 88 11 b2 00 00 02
00
Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid
46979, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 88 2e c8 00 00 02
00
Jun 19 07:08:05 p6 kernel: SCSI host 1 abort (pid 46977) timed out -
resetting
Jun 19 07:08:05 p6 kernel: SCSI bus is being reset for host 1 channel 0.
Jun 19 07:08:06 p6 kernel: (scsi1:0:8:0) Performing Domain validation.
Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Successfully completed Domain
validation.
Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Synchronous at 40.0 Mbyte/sec,
offset 8.
Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Performing Domain validation.
Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Successfully completed Domain
validation.
Jun 19 07:08:20 p6 kernel: SCSI host 1 abort (pid 46975) timed out -
resetting
Jun 19 07:08:20 p6 kernel: SCSI bus is being reset for host 1 channel 0.
Jun 19 07:08:20 p6 kernel: SCSI host 1 channel 0 reset (pid 46975) timed
out - trying harder
Jun 19 07:08:20 p6 kernel: SCSI bus is being reset for host 1 channel 0.
Jun 19 07:08:21 p6 kernel: SCSI host 1 reset (pid 46975) timed out again
-
Jun 19 07:08:21 p6 kernel: probably an unrecoverable SCSI bus or device
hang.
Jun 19 07:08:25 p6 kernel: scsi : aborting command due to timeout : pid
46988, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 88 11 b2 00 00 02
00
-- Paul Fulghum paulkf@austin.rr.com "what kind of party is this? there's no booze and only one hooker..." - Bender- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/