Hallo,
I found some bugs in kernel 2.3.10:
1. Summaries:
a) If you compile a kernel under a running 2.3.10-kernel, compiling
suddenly stops.
b) Itīs impossible to compile umsdos.
c) Removing a printjob from the queue produces a kerneltrap.
d) Itīs not possible to use modules for the parallel port, because
they are automatically not correctly loaded at runtime
2. Full description:
a) If you compile a kernel under a running 2.3.10-kernel, compiling
suddenly stops. It is independent from the version of the kernel
you compile. Under a running 2.2.x or 2.0.x-kernel, I never had
this problem.
There are no errormessages and no outputs in /var/log/messages. But
you dont get the prompt back again, until ctrl-c has been pressed.
Then you can start of again and compiling goes ahead, until it
stops at another point. After probabbly 3 restarts, the kernel is
build completely. I set the -j14 switch in Makefile for make.
b) If you want to compile umsdos - function into the kernel (as
modul or static), you get the errormessage, attached in "error".
c) I you remove a print job out of the queue and the printer is
off, you get a kernel trap (from /var/log/warn or
/var/log/messages)
please look at attechment "warn"
d) the parport_pc-module is not loaded automatically, when the
printserver is started. As a result, the printserver canīt find a
configured lp0 (or another lp) port. If you do a insmod parport_pc
and afterwards the printserver is restarted, printing is possible.
3. Keywords
a) processmanagement???
b) filesystem umsdos
c) paralell port, lp
d) loading paralellport modules at runtime
4. Kernelversion: 2.3.10
5. Output of Ooops-message: see warn-attachement
6. Environment:
- AMD K6 400 MHz, ALI M1543 Chip, ALi AGP-Set (Asus P5A-B
motherboard), 128 MB SD-RAM, IDE, no SCSI
- attachement "environment"
- attachement ".config" with the kernel-configuration.
Thank you for your work
A. Hartmann
--------------872584CAF1736BDD689A0AF4
Content-Type: text/plain; charset=us-ascii;
name="config"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="config"
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_M586TSC=y
# CONFIG_M686 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_POWER_OFF is not set
# CONFIG_APM_IGNORE_MULTIPLE_SUSPEND is not set
# CONFIG_APM_IGNORE_SUSPEND_BOUNCE is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_IDECD_SLOTS is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
# IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_IDEDMA_ULTRA_66 is not set
IDEDMA_PCI_EXPERIMENTAL=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_AEC6210 is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_BLK_DEV_CMD646 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_NETLINK is not set
# CONFIG_FIREWALL is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_ALIAS is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_RARP is not set
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
CONFIG_SCSI=y
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
#
# Token ring devices
#
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_SEALEVEL_4021 is not set
# CONFIG_DLCI is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA subsystem support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=m
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
#
# Joystick support
#
# CONFIG_JOYSTICK is not set
# CONFIG_DTLK is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
#
# USB drivers - not for the faint of heart
#
# CONFIG_USB is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFSD is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_SGI_DISKLABEL is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
--------------872584CAF1736BDD689A0AF4
Content-Type: text/plain; charset=us-ascii;
name="environment"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="environment"
-- Versions installed: (if some fields are empty or looks
-- unusual then possibly you have very old versions)
Linux susi 2.2.10 #44 Thu Jul 1 17:24:33 MEST 1999 i586 unknown
Kernel modules 2.2.2-pre6
Gnu C egcs-2.91.66
Binutils 2.9.1
Linux C Library > /lib/libc.so.6
Dynamic linker ldd (GNU libc) 2.1.1
Procps 1.2.11
Mount 2.9
Net-tools 1.50
Kbd 0.96
Sh-utils 1.12
Modules Loaded isofs serial unix
--------------872584CAF1736BDD689A0AF4
Content-Type: text/plain; charset=us-ascii;
name="warn"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="warn"
Jul 11 15:18:45 susi lpd[564]: lp: Print_open: cannot open /dev/lp0: Device not configured
Jul 11 15:22:41 susi lpd[128]: lp: Print_open: cannot open /dev/lp0: Device not configured
Jul 11 15:32:25 susi kernel: parport0: irq 7 detected
Jul 11 15:34:09 susi lpd[436]: lp: Print_string: write error: No such file or directory
Jul 11 15:34:09 susi kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000044
Jul 11 15:34:09 susi kernel: current->tss.cr3 = 01417000, %cr3 = 01417000
Jul 11 15:34:09 susi kernel: *pde = 00000000
Jul 11 15:34:09 susi kernel: Oops: 0000
Jul 11 15:34:09 susi kernel: CPU: 0
Jul 11 15:34:09 susi kernel: EIP: 0010:[<c8017397>]
Jul 11 15:34:09 susi kernel: EFLAGS: 00010297
Jul 11 15:34:09 susi kernel: eax: 00000001 ebx: c2865d80 ecx: c2865d80 edx: 00011fdc
Jul 11 15:34:09 susi kernel: esi: c801f3a4 edi: c2865d80 ebp: 00000000 esp: c1419f24
Jul 11 15:34:09 susi kernel: ds: 0018 es: 0018 ss: 0018
Jul 11 15:34:09 susi kernel: Process ljet4-a4-auto-m (pid: 437, process nr: 71, stackpage=c1419000)
Jul 11 15:34:09 susi kernel: Stack: 00000001 00000000 c801f3a4 00000001 c801f39c c1419f54 c1419f54 c266d000
Jul 11 15:34:09 susi kernel: 00000000 c801723f c2865d80 c266d000 00000001 00000000 c801f38c c801e4c2
Jul 11 15:34:09 susi kernel: c2865d80 c266d000 00000001 c0a2ccc0 ffffffea 00000000 c0a2ccc0 c14383a0
Jul 11 15:34:09 susi kernel: Call Trace: [<c801f3a4>] [<c801f39c>] [<c801723f>] [<c801f38c>] [<c801e4c2>] [sys_write+189/220] [system_call+52/64]
Jul 11 15:34:09 susi kernel: Code: 8b 4d 44 01 ca 8b 44 24 24 89 54 24 20 8a 18 40 89 44 24 24
Jul 11 16:00:07 susi lpd[294]: lp: Print_open: cannot open /dev/lp0: Device not configured
Jul 11 16:06:21 susi lpd[343]: lp: Print_open: cannot open /dev/lp0: Device not configured
Jul 11 16:10:26 susi kernel: parport0: irq 7 detected
Jul 11 16:12:45 susi lpd[400]: lp: Print_string: write error: No such file or directory
Jul 11 16:12:45 susi kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000044
Jul 11 16:12:45 susi kernel: current->tss.cr3 = 01163000, %cr3 = 01163000
Jul 11 16:12:45 susi kernel: *pde = 00000000
Jul 11 16:12:45 susi kernel: Oops: 0000
Jul 11 16:12:45 susi kernel: CPU: 0
Jul 11 16:12:45 susi kernel: EIP: 0010:[<c8019397>]
Jul 11 16:12:45 susi kernel: EFLAGS: 00013297
Jul 11 16:12:45 susi kernel: eax: 00000001 ebx: c2537000 ecx: c2537000 edx: 000166fc
Jul 11 16:12:45 susi kernel: esi: c80213a4 edi: c2537000 ebp: 00000000 esp: c1165f24
Jul 11 16:12:45 susi kernel: ds: 0018 es: 0018 ss: 0018
Jul 11 16:12:45 susi kernel: Process ljet4-a4-auto-m (pid: 401, process nr: 66, stackpage=c1165000)
Jul 11 16:12:45 susi kernel: Stack: 00000001 00000000 c80213a4 00000001 c802139c c1165f54 c1165f54 c2d33000
Jul 11 16:12:45 susi kernel: 00000000 c801923f c2537000 c2d33000 00000001 00000000 c802138c c80204c2
Jul 11 16:12:45 susi kernel: c2537000 c2d33000 00000001 c1496900 ffffffea 00000000 c1496900 c1762200
Jul 11 16:12:45 susi kernel: Call Trace: [<c80213a4>] [<c802139c>] [<c801923f>] [<c802138c>] [<c80204c2>] [sys_write+189/220] [system_call+52/64]
Jul 11 16:12:45 susi kernel: Code: 8b 4d 44 01 ca 8b 44 24 24 89 54 24 20 8a 18 40 89 44 24 24
Jul 11 17:43:02 susi lpd[273]: lp: Print_open: cannot open /dev/lp0: Device not configured
Jul 11 17:44:36 susi lpd[299]: lp: Print_open: cannot open /dev/lp1: Device not configured
Jul 11 18:18:25 susi kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000044
Jul 11 18:18:25 susi kernel: current->tss.cr3 = 0512e000, %cr3 = 0512e000
Jul 11 18:18:25 susi kernel: *pde = 00000000
Jul 11 18:18:25 susi kernel: Oops: 0000
Jul 11 18:18:25 susi kernel: CPU: 0
Jul 11 18:18:25 susi kernel: EIP: 0010:[parport_ieee1284_write_compat+103/848]
Jul 11 18:18:25 susi kernel: EFLAGS: 00010293
Jul 11 18:18:25 susi kernel: eax: 00000002 ebx: c7fea260 ecx: c7fea260 edx: 00006b8c
Jul 11 18:18:25 susi kernel: esi: c0229504 edi: c7fea260 ebp: 00000000 esp: c5129f24
Jul 11 18:18:25 susi kernel: ds: 0018 es: 0018 ss: 0018
Jul 11 18:18:25 susi kernel: Process lpd (pid: 129, process nr: 14, stackpage=c5129000)
Jul 11 18:18:25 susi kernel: Stack: 00000002 00000000 c0229504 00000002 c02294fc c5129f54 c5129f54 c50ff000
Jul 11 18:18:25 susi kernel: 00000000 c01a41ef c7fea260 c50ff000 00000002 00000000 c02294ec c01a2372
Jul 11 18:18:25 susi kernel: c7fea260 c50ff000 00000002 c52cfe00 ffffffea 00000000 c52cfe00 c5129fb0
Jul 11 18:18:25 susi kernel: Call Trace: [parport_write+155/160] [lp_write+174/600] [sys_write+189/220] [system_call+52/64]
Jul 11 18:18:25 susi kernel: Code: 8b 4d 44 01 ca 8b 44 24 24 89 54 24 20 8a 18 40 89 44 24 24
--------------872584CAF1736BDD689A0AF4--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/