Re: Intel Xpress Server - IO APIC trouble - Kernel panic: IO APIC +
James Bottomley (James.Bottomley@columbiasc.ncr.com)
Thu, 29 Jul 1999 10:11:13 -0500
sweetheart0@home.com said:
> the message was the same exept the part about the bus speed, it was
> reported at 33mhz. The IO-APIC said pins 0,2,13 not connected, only
> said 2 and 13 before, and the setting up timer as ExtINT said found
> pin0... then it failed... I am going to try the patch Marcie sent me
> next... I figure if the patch she sent me helps in other areas I may
> be able to take the little C I know and combine the 2 to make it
> work... I will report back to the group... but unfotunately I am in
> the process of moving and losing my ISP... not sure when I will get
> back on.
Could you send the text of the new boot up sequence? What is the failure,
hang or crash? There are several potential causes of the problem:
1) The eagle is 486 (or pentium with external local apic based) The code to
handle this cause could be causing grief
2) There's special code to detect the IO-APIC and re-route the interrupts in
physical mode, is this getting triggered?
James
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/