scsi dvice scaned but what is the next?
WANG,YIDING (yiding_wang@am.exch.hp.com)
Fri, 6 Aug 1999 15:19:08 -0600
I have RedHat Linx 6.0 (Linux 2.2.5). When I use "insmod" load my Fibre
Channel HBA driver, it shows:
scsi : 1 host.
Vendor: SEAGATE ModelL ST39102FC Rev: 0006
Type: Direct-Access
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7
GB]
sda: unknown partition table
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7
GB]
sdb: unknown partition table
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7
GB]
sdc: unknown partition table
The it stops and back to system prompt.
What is the next?
Is the driver module loading process completed?
- If so, what is the next thing I do to find the device,
partition it and mount the device for some IO test?
- If not, what could be the problem for stopping te laoding process?
Many thanks!
-eddie
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/