Re: PATCH: was Re: 2.3.13 pci_namedevice compile error

Joerg Pommnitz (pommnitz@darmstadt.gmd.de)
Thu, 12 Aug 1999 09:12:35 +0200

With this patch applied I could compile the kernel, but the result
fails to initialize my 53c810 adapter.

With 2.3.13 + Alans patch I get:

ncr53c8xx: at PCI bus 0, device 18, function 0
ncr53c8xx: disabling I/O mapping since base address 0 (0xe1000000)
bits 0..1 indicate a non-IO mapping
ncr53c8xx: not initializing, both I/O and memory mappings disabled

whereas plain 2.2.11 gives:

ncr53c8xx: at PCI bus 0, device 18, function 0
ncr53c8xx: 53c810 detected
ncr53c810-0: rev=0x02, base=0xe1000000, io_port=0x6100, irq=11
ncr53c810-0: ID 7, Fast-10, Parity Checking
ncr53c810-0: restart (scsi reset).

Regards
Joerg

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/