Here we have three "cat /proc/interupts"
followed by a killall esd
followed by another three "cat /proc/interupt"s
[mastersj@periscope mastersj]$ cat /proc/interrupts
CPU0
0: 5413616 XT-PIC timer
1: 49964 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1441765 XT-PIC serial
5: 36187942 XT-PIC soundblaster
11: 197 XT-PIC eth0
12: 1683596 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 853066 XT-PIC ide0
15: 10788 XT-PIC ide1
NMI: 0
ERR: 0
[mastersj@periscope mastersj]$ cat /proc/interrupts
CPU0
0: 5414283 XT-PIC timer
1: 49970 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1441765 XT-PIC serial
5: 36192535 XT-PIC soundblaster
11: 197 XT-PIC eth0
12: 1683596 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 853138 XT-PIC ide0
15: 10788 XT-PIC ide1
NMI: 0
ERR: 0
[mastersj@periscope mastersj]$ cat /proc/interrupts
CPU0
0: 5415149 XT-PIC timer
1: 49976 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1441771 XT-PIC serial
5: 36198488 XT-PIC soundblaster
11: 197 XT-PIC eth0
12: 1683596 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 853146 XT-PIC ide0
15: 10788 XT-PIC ide1
NMI: 0
ERR: 0
[mastersj@periscope mastersj]$ su
Password:
[root@periscope mastersj]# killall esd
[root@periscope mastersj]# exit
exit
[mastersj@periscope mastersj]$ cat /proc/interrupts
CPU0
0: 5417201 XT-PIC timer
1: 50052 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1442532 XT-PIC serial
5: 36206128 XT-PIC soundblaster
11: 197 XT-PIC eth0
12: 1683770 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 853239 XT-PIC ide0
15: 10788 XT-PIC ide1
NMI: 0
ERR: 0
[mastersj@periscope mastersj]$ cat /proc/interrupts
CPU0
0: 5417884 XT-PIC timer
1: 50058 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1443135 XT-PIC serial
5: 36206128 XT-PIC soundblaster
11: 197 XT-PIC eth0
12: 1683770 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 853250 XT-PIC ide0
15: 10788 XT-PIC ide1
NMI: 0
ERR: 0
[mastersj@periscope mastersj]$ cat /proc/interrupts
CPU0
0: 5418590 XT-PIC timer
1: 50064 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 1443169 XT-PIC serial
5: 36206128 XT-PIC soundblaster
11: 197 XT-PIC eth0
12: 1683770 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 853256 XT-PIC ide0
15: 10788 XT-PIC ide1
NMI: 0
ERR: 0
Roger Larsson wrote:
> Hi again,
>
> You need a two timed samples from /proc/interrupt to
> tell the interrupt rate... (it only counts)
>
> >
> > and here is
> >
> > cat /proc/sound:
> >
> > [mastersj@periscope mastersj]$ cat /proc/sound
> > OSS/Free:3.8s2++-971130
> > Load type: Driver loaded as a module
> > Kernel: Linux periscope 2.2.11 #22 SMP Thu Aug 12 03:00:17 BST 1999 i686
> >
> > Config options: 0
> >
> > Installed drivers:
> >
> > Card config:
> >
> > Audio devices:
> > 0: Sound Blaster 16 (4.16) (DUPLEX)
> >
> > Synth devices:
> > 0: AWE32-0.4.3 (RAM512k)
>
> ^ Detta skiljer
>
> >
> > Midi devices:
> > 0: Sound Blaster 16
> > 1: AWE Midi Emu
>
> ^ Och detta (1:)
>
> >
> > Timers:
> > 0: System clock
> >
> > Mixers:
> > 0: Sound Blaster
> >
>
> Other than that they are identical with mine.
>
> /RogerL
--
Jonathan C. Masters (jonathan@oxlug.org)
PGP: www.brookes.ac.uk/~95227860/KEY
"Upon this rock I will build my church,
and the gates of hell shall not prevail against it".
-- Matthew 16, 17-18
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/