Re: Trying to free free IRQ

Trever Adams (trever_Adams@bigfoot.com)
Sun, 22 Aug 1999 16:51:21 -0600

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Andrea Arcangeli: "Re: Kernels > 1M"
Previous message: Andreas Bombe: "FireWire development status"
Maybe in reply to: David Odin: "Trying to free free IRQ"

I disagree Sam. If that is what it is meant to do, then something is
broken. My modem is on IRQ3 (ppp tests as well). There is NO other
device on that irq unless the new PnP routines have assigned some other
device that irq on boot, but from boot messages and /proc/interrupts, it
hasn't. Also, now in 2.3.14 (first 2.3 I have tried), my serial ports
do NOT show up in /proc/interrupts!

Trever

EPOX MPV3-C Motherboard with 128 meg of SDRAM, Permedia 2 video, NetGear
FA310TX card, Symbios scsi card (Diamond Dual FirePort 40), USRobotics
56k modem (non PnP mode), and I believe that is it.

From: Smc659@aol.com
Date: Fri, 20 Aug 1999 21:00:02 EDT
Subject: Re: Trying to free free IRQ

Its trying to free an IRQ thats in conflict with another. If IRQ3 only
shows
up on PPP then it must be your modem. Have you added any new devices
lately?

Sam

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: Andrea Arcangeli: "Re: Kernels > 1M"
Previous message: Andreas Bombe: "FireWire development status"
Maybe in reply to: David Odin: "Trying to free free IRQ"