PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (rev 3).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
Bus 0, device 1, function 0:
PCI bridge: Intel 440BX - 82443BX AGP (rev 3).
Medium devsel. Master Capable. Latency=64. Min Gnt=136.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No
bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0xf000 [0xf001].
Bus 0, device 7, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable.
Latency=64.
I/O at 0xe000 [0xe001].
Bus 0, device 7, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 8, function 0:
Ethernet controller: 3Com 3C905B 100bTX (rev 48).
Medium devsel. IRQ 15. Master Capable. Latency=64. Min Gnt=10.Max
Lat=10.
I/O at 0xe400 [0xe401].
Non-prefetchable 32 bit memory at 0xe8801000 [0xe8801000].
Bus 0, device 9, function 0:
SCSI storage controller: Adaptec AIC-7881U (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
Latency=64. Min Gnt=8.Max Lat=8.
I/O at 0xe800 [0xe801].
Non-prefetchable 32 bit memory at 0xe8800000 [0xe8800000].
Bus 0, device 10, function 0:
Parallel controller: Unknown vendor Unknown device (rev 0).
Vendor id=1407. Device id=8000.
Slow devsel. Fast back-to-back capable. IRQ 10.
I/O at 0xec00 [0xec01].
Bus 1, device 0, function 0:
VGA compatible controller: Silicon Integrated Systems Unknown device
(rev 11).
Vendor id=1039. Device id=6326.
Medium devsel. Master Capable. Latency=64. Min Gnt=2.
Prefetchable 32 bit memory at 0xe8000000 [0xe8000008].
Non-prefetchable 32 bit memory at 0xe5000000 [0xe5000000].
I/O at 0xd000 [0xd001].
I believe it may be bus 0, device 10..how can I enable it? Linux only
recognizes 3 of the four I have in my system. There is the one attached to
the motherboard, dual ISA parallel port, and then this PCI PnP parallel port
which is unrecognized.
Regards, Dave
----- Original Message -----
From: Tim Waugh <tim@cyberelk.demon.co.uk>
To: Paradox <paradox3@maine.rr.com>
Cc: <linux-kernel@vger.rutgers.edu>
Sent: Sunday, August 22, 1999 11:19 AM
Subject: Re: Support for PnP PCI Parallel port?
> On Sun, 15 Aug 1999, Paradox wrote:
>
> > Can linux somehow support my I/O Flex PnP PCI Parallel port card?
>
> Yes; please send me the output of 'lspci' or 'cat /proc/pci' and I will
> send you a patch to try.
>
> Thanks,
> Tim.
> */
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/