I'm sure this must be in some FAQ somewhere...
I've been having problems for a while now with setserial.
My PPP script looks something like this:
/bin/setserial /dev/modem spd_vhi
exec /usr/sbin/pppd /dev/modem 38400 \
$LOCAL_IP:$REMOTE_IP \
connect $DIALER_SCRIPT
And this generates the following kernel message:
Aug 22 10:24:48 skinner kernel: Use of setserial/setrocket to set
SPD_* flags is deprecated
Aug 22 10:24:49 skinner pppd[2904]: pppd 2.3.5 started by root, uid 0
Aug 22 10:24:49 skinner kernel: Use of setserial/setrocket to set
SPD_* flags is deprecated
Aug 22 10:25:16 skinner pppd[2904]: Serial connection established.
Aug 22 10:25:17 skinner pppd[2904]: Using interface ppp0
Aug 22 10:25:17 skinner pppd[2904]: Connect: ppp0 <--> /dev/modem
Anyone any ideas?
(This has been happening for a while and I have been searching the web
but the only thing I found was someone else who had a similar problem)
If this is deprecated then what is the current way of setting the serial
port to 115kb?
-- Simon [ huggie@earth.li ] *\ "Screw down my diodes and call me \** [ http://ds.dial.pipex.com/huggie/ ] **\ Frank." - Kryten \* **************** [ Huggietag 0.8.6 ] ***\ \- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/