System is a AMD K6-200/64megs and Wanpipe 2.0.7 on Kernel 2.2.12. I've
tripple checked all my settings and beat myself up over this. Please tell
me this is something simple!
The frame comes up and logs:
Aug 31 21:49:01 firewall kernel: fr16: Recvd PtP addr 192.168.0.9 -InArp Reply
And all is good until:
Aug 31 23:13:09 firewall kernel: fr16: Recvd PtP addr 192.168.0.5 -InArp Req
Aug 31 23:13:09 firewall kernel: wanpipe1: Invalid PtP address. InARP ignored.
Aug 31 23:13:09 firewall kernel: mask FCFFFFFF
Aug 31 23:13:09 firewall kernel: local A00A8C0
Aug 31 23:13:09 firewall kernel: wanpipe1: Error processing ARP Packet.
Aug 31 23:13:09 firewall kernel: fr16: Recvd PtP addr 192.168.0.9 -InArp Req
Aug 31 23:13:09 firewall kernel: wanpipe1: Adding of route failed. Error: -17
Aug 31 23:13:09 firewall kernel: fr16: Address: 192.168.0.9
Aug 31 23:13:10 firewall kernel: fr16: Recvd PtP addr 192.168.0.13 -InArp Req
Aug 31 23:13:10 firewall kernel: wanpipe1: Invalid PtP address. InARP ignored.
Aug 31 23:13:10 firewall kernel: mask FCFFFFFF
Aug 31 23:13:10 firewall kernel: local A00A8C0
Aug 31 23:13:10 firewall kernel: wanpipe1: Error processing ARP Packet.
Aug 31 23:13:18 firewall kernel: fr16: Recvd PtP addr 192.168.0.5 -InArp Req
Aug 31 23:13:18 firewall kernel: wanpipe1: Invalid PtP address. InARP ignored.
Aug 31 23:13:18 firewall kernel: mask FCFFFFFF
Aug 31 23:13:18 firewall kernel: local A00A8C0
Aug 31 23:13:18 firewall kernel: wanpipe1: Error processing ARP Packet.
Aug 31 23:13:18 firewall kernel: fr16: Recvd PtP addr 192.168.0.9 -InArp Req
Aug 31 23:13:18 firewall kernel: wanpipe1: Adding of route failed. Error: -17
Aug 31 23:13:18 firewall kernel: fr16: Address: 192.168.0.9
Aug 31 23:13:19 firewall kernel: fr16: Recvd PtP addr 192.168.0.13 -InArp Req
Aug 31 23:13:19 firewall kernel: wanpipe1: Invalid PtP address. InARP ignored.
Aug 31 23:13:19 firewall kernel: mask FCFFFFFF
Aug 31 23:13:19 firewall kernel: local A00A8C0
Aug 31 23:13:19 firewall kernel: wanpipe1: Error processing ARP Packet.
Traffic stops coming in, but stills goes out okay.
Then I restart the wanpipe drivers an all is good untl it happens again.
The amount of time it takes to die varries. Please help!
Gregory Maxwell
-- The comments and opinions expressed herein are those of the author of this message and may not reflect the policies of the Martin County Board of County Commissioners.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/