> I have a strnage problem and have spent a number of hours investigating
> but haven't found a solution so I thought I'd try the list.
>
> I have an old aha1542 card thats driving a sony dat drive, with all the
> scsi options set for module and under kernel 2.2.9 everything works
> fine as below:-
>
> Configuring Adaptec (SCSI-ID 7) at IO:334, IRQ 11,DMA priority 5
> Sep 11 17:21:14 bored kernel: scsi0 : Adaptec 1542
> Sep 11 17:21:14 bored kernel: scsi : 1 host.
> Sep 11 17:21:14 bored kernel: Vendor: SONY Model: SDT-5200
> Rev:3.02
> Sep 11 17:21:14 bored kernel: Type: Sequential-Access
> ANSI
> SCSI revision: 02
>
> However, if I use kernel 2.2.11 or 2.2.12 then it will not find the
> scsi card at boot time and I cannot convince it to find it at all using
> modprobe or insmod. Under both of these kernels if i try to use
> modprobe I get:-
>
> /sbin/modprobe aha1542.o
> /lib/modules/2.2.12udma/scsi/aha1542.o: init_module: Device or resource
> busy
>
/sbin/modprobe aha1542 aha1542=0x334 doesn't work?
-----
Chris D. Faulhaber <jedgar@fxp.org> | All the true gurus I've met never
System/Network Administrator, | claimed they were one and always
Reality Check Information, Inc. | pointed to someone better.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/