boot.msg
------------------ cut ----------------------
<4>aec671x_detect:
<4> ACARD AEC-671X PCI Ultra/W SCSI-3 Host Adapter: 0 IO:6400,
IRQ:10.
<4> ID: 6 MATSHITACD-R CW-7502 3.02
<4> ID: 7 Host Adapter
<4>scsi0 : ACARD AEC-6710/6712 PCI Ultra/W SCSI-3 Adapter Driver V1.0
<4>scsi : 1 host.
<4>scsi0 channel 0 : resetting for second half of retries.
<4>SCSI bus is being reset for host 0 channel 0.
<4>scsi : detected total.
^^^^^^^^^^^^^^^^^
------------------ cut ----------------------
here is my hardware:
Board: Biostar M5AT
Prozessor: AMD K6 233 Mhz
Sound: Terratec Maestro 32/96
Grafik: Biostar Voodoo Rush
Scsi: Acard SCSI AEC6710u (atp870u)
CD Brenner: MATSHITACD-R CW-7502 3.02
Netz: ne2000 Isa
command
#echo "scsi add-single-device 0 0 6 0" >/proc/scsi/scsi
doesn't work
# cat /proc/scsi/scsi
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: h Model: \ =3D Rev:
Type: Sequential-Access ANSI SCSI revision: 01 =
a try with cdrecord:
#cdrecord -scanbus
Cdrecord release 1.6.1 Copyright (C) 1995-1998 J=F6rg Schilling
cdrecord: Cannot open SCSI driver.
#lsmod
Module Size Used by
sd_mod 15580 0 (unused)
atp870u 47568 0 (autoclean) (unused)
sg 11768 0 (autoclean) (unused)
scsi_mod 51120 3 (autoclean) [sd_mod atp870u sg]
ne 6512 1 (autoclean)
8390 6084 0 (autoclean) [ne]
serial 18324 1 (autoclean) =
sorry for my bad english :(
thx
Bruno
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/