Works fine here on 2.2.12 and 2.3.18
/var/log/dmesg
Linux version 2.3.18 (root@krw.dyndns.org) (gcc version egcs-2.91.60
19981201 (egcs-1.1.1 release)) #6 Sun Sep 12 03:13:31 /usr/loca
l/etc/localtime 1999
scsi0 : AdvanSys SCSI 3.2G: PCI Ultra 16 CDB: IO D800/F, IRQ 12
scsi : 1 host.
Vendor: MATSHITA Model: CD-R CW-7502 Rev: 4.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom total.
sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
/proc/scsi/advansys/0
Device Information for AdvanSys SCSI Host 0:
Target IDs Detected: 6, 7, (7=Host Adapter)
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: MATSHITA Model: CD-R CW-7502 Rev: 4.05
Type: CD-ROM ANSI SCSI revision: 02
EEPROM Settings for AdvanSys SCSI Host 0:
Serial Number: AE54C713B960
Host SCSI ID: 7, Host Queue Size: 16, Device Queue Size: 8
cntl ff00, no_scam 8
Target ID: 0 1 2 3 4 5 6 7
Disconnects: Y Y Y N Y Y Y Y
Command Queuing: N N N N N N N N
Start Motor: Y Y Y N Y Y Y Y
Synchronous Transfer: Y Y Y Y Y Y Y Y
Linux Driver Configuration and Information for AdvanSys SCSI Host 0:
host_busy 0, last_reset 0, max_id 8, max_lun 8, max_channel 0
unique_id 0, can_queue 16, this_id 7, sg_tablesize 50, cmd_per_lun 0
unchecked_isa_dma 0, use_clustering 1, loaded_as_module 0
flags 8, last_reset 0, jiffies 4e90
queue_depth: 6:4
Linux Driver Statistics for AdvanSys SCSI Host 0:
command 0, queuecommand 9, abort 0, reset 0, biosparam 0
interrupt 11, callback 9, done 9
exe_noerror 9, exe_busy 0, exe_error 0, exe_unknown 0
build_error 0
cont_cnt 9, cont_xfer 1.0 kb avg_xfer 0.1 kb
Active and Waiting Request Queues (Time Unit: 100 HZ):
target 6
active: cnt [cur 0, max 1, tot 3], time [min 0, max 1, avg 0.3]
waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0]
Asc Library Configuration and Statistics for AdvanSys SCSI Host 0:
chip_version 10, lib_version 118, lib_serial_no 121, mcode_date 12c3
mcode_version 50d, err_code 0
Total Command Pending: 0
Command Queuing: 6:N
Command Queue Pending: 6:0
Command Queue Limit: 6:4
Command Queue Full: 6:N
Synchronous Transfer: 6:Y
6: Transfer Period Factor: 25 (10.0 Mhz), REQ/ACK Offset: 8
-- Ken Witherow Keeper of the alt.rock-n-roll.metal.metallica FAQ http://www.frontiernet.net/~phantoml/armm.html Linux 2.3.18 - Because I'd like to get there today- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/