> > LO> Sep 30 18:49:33 cb26038-a kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> > LO> Sep 30 18:49:33 cb26038-a kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
>
> this is just a reminder: IDE requires that your cable is <= 18",
> and that you use the end connectors first (no stubs).
> udma66 also requires a special cable with extra ground conductors
> (these cables work fine for sub-udma66 as well).
Yes they do.......at 24-inch 80 condutor udma66 parts will do ATA-33 at
24-inches............imperical tests only.
> from a quick glance at the code, this message seems to originate in
> ide_dma.c:ide_dma_intr, as the result of _any_ bad CRC. occasional bad CRC's
> are not really a problem, and the IO will be retried.
>
> regards, mark hahn.
Andre Hedrick
The Linux IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/