Sep 30 23:50:29 bp6 kernel:
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
HPT366: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xec00-0xec07, BIOS settings: hdc:DMA, hdd:pio
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xf000-0xf007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xf008-0xf00f, BIOS settings: hdg:pio, hdh:pio
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
hdc: WDC AC310200R, ATA DISK drive
ide0 at 0xd800-0xd807,0xdc02 on irq 18
ide1 at 0xe400-0xe407,0xe802 on irq 18
Andre Hedrick
The Linux IDE guy
On Fri, 1 Oct 1999, Tom Livingston wrote:
> HELLRAiDER wrote:
> > also, i treid this patch today, and it does not recognise my 2nd ide
> > channel of the hpt366 chipset on my abit bp6 again... :/
>
> Set "show experimental" in code options
> then select hpt-366 in block device options
> then select hpt-366 (experimental) which shows up underneath once hpt-366 is
> selected. This is the not-yet-named-quite-right option to enable the 2nd
> channel on the abit
>
> tom
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/