I have a bunch of Gateway ALR 8200 hundred servers. They have bult in
Intel EtherExpress Pro100 network cards. Since I have upgraded to 2.3.18
kernels I am getting alot of 'Transmit timed out:' messages. All of the
servers are pluged into a cisco 2924 switches. This problem is
reproducable very easily especialy if you do ping -f on both receiving and
sending side of the link. I have tried repacing the switches and can
reproduce the problem both on a Bay Networks and Cisco 1900 switches. Also
I tried changing network cards and this hapens only on a builtin
EEPRO100, both Netgear and EEPRO100-PCI are working great.
thanks fil
P.S.
I Looked into the EEPro100 Mailing List archive and saw quite a few people
with the same or similar problem, but wasn't sure about the outcome or the
solution? Any suggestions?
eth0: Transmit timed out: status 0050 0070 at 348942/348954 command
000c0000.
eth0: Tx ring dump, Tx queue 348954 / 348942:
eth0: 0 000ca000.
eth0: 1 000ca000.
eth0: 2 000ca000.
eth0: 3 000ca000.
eth0: 4 000ca000.
eth0: 5 000ca000.
eth0: 6 000ca000.
eth0: 7 000ca000.
eth0: 8 000ca000.
eth0: 9 000ca000.
eth0: 10 000ca000.
eth0: 11 000ca000.
eth0: 12 000ca000.
eth0: 13 000ca000.
eth0: * 14 000c0000.
eth0: 15 000ca000.
eth0: 16 000ca000.
eth0: 17 000ca000.
eth0: 18 000ca000.
eth0: 19 000ca000.
eth0: 20 000ca000.
eth0: 21 000ca000.
eth0: 22 000ca000.
eth0: 23 000ca000.
eth0: 24 000ca000.
eth0: 25 400ca000.
eth0: =26 000ca000.
eth0: 27 000ca000.
eth0: 28 000ca000.
eth0: 29 000ca000.
eth0: 30 000ca000.
eth0: 31 000ca000.
eth0:Printing Rx ring (next to receive into 338338).
Rx ring entry 0 00000001.
Rx ring entry 1 c0000001.
Rx ring entry 2 00000001.
Rx ring entry 3 00000001.
Rx ring entry 4 00000001.
Rx ring entry 5 00000001.
Rx ring entry 6 00000001.
Rx ring entry 7 00000001.
Rx ring entry 8 00000001.
Rx ring entry 9 00000001.
Rx ring entry 10 00000001.
Rx ring entry 11 00000001.
Rx ring entry 12 00000001.
Rx ring entry 13 00000001.
Rx ring entry 14 00000001.
Rx ring entry 15 00000001.
Rx ring entry 16 00000001.
Rx ring entry 17 00000001.
Rx ring entry 18 00000001.
Rx ring entry 19 00000001.
Rx ring entry 20 00000001.
Rx ring entry 21 00000001.
Rx ring entry 22 00000001.
Rx ring entry 23 00000001.
Rx ring entry 24 00000001.
Rx ring entry 25 00000001.
Rx ring entry 26 00000001.
Rx ring entry 27 00000001.
Rx ring entry 28 00000001.
Rx ring entry 29 00000001.
Rx ring entry 30 00000001.
Rx ring entry 31 00000001.
PHY index 1 register 0 is 3000.
PHY index 1 register 1 is 7829.
PHY index 1 register 2 is 02a8.
PHY index 1 register 3 is 0150.
PHY index 1 register 4 is 05e1.
PHY index 1 register 5 is 41e1.
PHY index 1 register 21 is 0000.
eth0: Trying to restart the transmitter...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/